Self-Aligning Ball Bearings

ISO 15 · 12 / 13 / 22 / 23 · Straight & 1:12 K Taper12 Verified ModelsBore 40–75 mm

Double-row ISO 15 self-aligning ball bearings featuring a spherical outer-ring raceway that accommodates 2.5°–3° shaft deflection with minimal running heat on HVAC fans, agricultural drives, conveyor head shafts, and SN/SNL plummer blocks.

ISO 15 Series12 / 13 (Standard Width) · 22 / 23 (Wide Heavy Section)
Alignment & TorqueSelf-Aligning ~2.5°–3° · Very Low Friction & Cool Running
Taper & Sleeve RuleCylindrical or 1:12 K Taper Only (H2 / H3 / H23 Sleeves)
  • Self-Aligning Ball Bearings

    1208 Self-Aligning Ball Bearing 40 × 80 × 18 mm

    ISO 15 Series 02 double-row self-aligning ball bearing sized 40 × 80 × 18 mm, engineered for quiet, low-torque rotation on commercial HVAC centrifugal fan shafts. Supplied in cylindrical 1208 or 1:12 tapered 1208K bore with H208 adapter sleeve options for mixed-lot and OEM procurement.

  • Self-Aligning Ball Bearings

    1209 Self-Aligning Ball Bearing 45 × 85 × 19 mm

    ISO 15 Series 02 double-row 1209 self-aligning ball bearing measuring 45 × 85 × 19 mm, built for whisper-quiet, low-torque rotation on commercial HVAC centrifugal supply fans and long textile carding line-shafts. Supplied in 45 mm straight bore or 1:12 tapered 1209K with H209 adapter sleeve.

  • Self-Aligning Ball Bearings

    1210 Self-Aligning Ball Bearing 50 × 90 × 20 mm

    Double-row 1210 self-aligning ball bearing measuring 50 × 90 × 20 mm (ISO 15 Series 02, 20 mm width), built to tolerate seasonal frame twist on grain elevator head shafts and screw augers. Offered in straight 1210 or 1:12 tapered 1210K with H210 sleeve for OEM and agribusiness MRO.

  • Self-Aligning Ball Bearings

    1212 Self-Aligning Ball Bearing 60 × 110 × 22 mm

    ISO 15 Series 02 1212 self-aligning ball bearing (60 × 110 × 22 mm) engineered for multi-pedestal textile spinning and weaving line-shafts requiring cool, continuous operation. Available in straight 1212 or 1:12 tapered 1212K bore with H212 adapter sleeve upon factory drawing confirmation.

  • Self-Aligning Ball Bearings

    1310 Self-Aligning Ball Bearing 50 × 110 × 27 mm

    ISO 15 Series 03 medium-heavy 1310 self-aligning ball bearing sized 50 × 110 × 27 mm, providing a larger ball cross-section than 1210 for dust-collector and boiler induced-draft blowers. Available in cylindrical 1310 or 1:12 tapered 1310K with H310 sleeve; check ball side-protrusion clearance.

  • Self-Aligning Ball Bearings

    1312 Self-Aligning Ball Bearing 60 × 130 × 31 mm

    Medium Series 03 ISO 15 1312 self-aligning ball bearing sized 60 × 130 × 31 mm, engineered for grain elevator bucket-belt head pulleys and quarry screen drive jackshafts in SNL/SN plummer blocks. Available in 60 mm cylindrical bore or 1:12 tapered 1312K with H312 sleeve (55 mm shaft).

  • Self-Aligning Ball Bearings

    2208 Self-Aligning Ball Bearing 40 × 80 × 23 mm

    Wide ISO 15 Series 22 double-row 2208 self-aligning ball bearing (40 × 80 × 23 mm), offering a broader 23 mm support footprint than 1208 for woodworking planer feed-rolls and sawmill edger shafts. Available open or -2RS sealed, cylindrical 2208 or 1:12 tapered 2208K with H308 sleeve.

  • Self-Aligning Ball Bearings

    2210 Self-Aligning Ball Bearing 50 × 90 × 23 mm

    Wide Series 22 ISO 15 2210 self-aligning ball bearing measuring 50 × 90 × 23 mm, delivering higher radial load capacity than narrow 1210 inside the identical 90 mm housing bore. Tailored for food-processing screw conveyors and sawmill edger feed-roll plummer blocks; optional 2210K + H310 (45 mm shaft).

  • Self-Aligning Ball Bearings

    2212 Self-Aligning Ball Bearing 60 × 110 × 28 mm

    ISO 15 Series 22 double-row 2212 self-aligning ball bearing (60 × 110 × 28 mm) built for low-drag paper-mill wire-section guide rolls and web-converting rollers. Available open or -2RS sealed, cylindrical 2212 or 1:12 tapered 2212K with H312 adapter sleeve.

  • Self-Aligning Ball Bearings

    2215 Self-Aligning Ball Bearing 75 × 130 × 31 mm

    Wide ISO 15 Series 22 2215 self-aligning ball bearing measuring 75 × 130 × 31 mm, suited to aggregate belt-conveyor tail pulleys and screening feeder drives with structural frame flex. Supplied in straight 2215 or 1:12 tapered 2215K with H315 adapter sleeve for 65 mm plain shafting.

  • Self-Aligning Ball Bearings

    2310 Self-Aligning Ball Bearing 50 × 110 × 40 mm

    Heavy wide-series 2310 self-aligning ball bearing (50 × 110 × 40 mm, ISO 15 Series 23), built for steep overhang radial loads on industrial dewatering pump pedestals and brick-making mixer shafts. Supplied straight 2310, sealed -2RS, or 1:12 tapered 2310K with H2310 sleeve; verify ball side-protrusion.

  • Self-Aligning Ball Bearings

    2312 Self-Aligning Ball Bearing 60 × 130 × 46 mm

    Heavy wide Series 23 ISO 15 2312 self-aligning ball bearing measuring 60 × 130 × 46 mm, engineered for wood-chipper infeed rollers and paper-mill felt-guide rolls spanning flexible, frame-distorted housings. Supplied in 60 mm cylindrical bore or 1:12 tapered 2312K with heavy H2312 sleeve (55 mm shaft).

ISO 15 · DOUBLE-ROW LOW-FRICTION SELF-ALIGNING

Self-Aligning Ball Bearing Selection Matrix (12 / 13 / 22 / 23 Series)

ISO 15 double-row ball bearings with sphered outer raceways compensating 2°–3° shaft deflection at high speeds and minimal frictional heat.

Series Engineering Matrix

ZQM Verified Engineering Basis
Bearing Series Load & Structure Profile Bore / Dimension Rule Typical Heavy-Duty Equipment Direct Resource
12 Series (1208 / 1210 / 1212) Light narrow ISO 02 section Cylindrical or 1:12 K (H2xx) HVAC supply fans, grain elevator shafts, textile line-shafts View Specs
13 Series (1310) Medium-heavy ISO 03 section Cylindrical or 1:12 K (H3xx) Induced-draft dust blowers & higher-radial fan impellers View Specs
22 Series (2208 / 2212 / 2215) Wide ISO 22 section (opt. -2RS) Cylindrical or 1:12 K (H3xx) Woodworking planers, paper-mill guide rolls, conveyor pulleys View Specs
23 Series (2310) Extra-wide heavy ISO 23 section Cylindrical or 1:12 K (H23xx) Dewatering pump pedestals & overhang mixer shafts View Specs

Taper & Structure Rule: Base designations (1208–2310) have cylindrical straight bores. Optional tapered bore variants (K) use a 1:12 taper ONLY (paired with ISO 2982-1 H2xx/H3xx/H23xx adapter sleeves—never 1:30 K30). Check side-face ball protrusion clearance on open 13xx/23xx sizes.

Connected Engineering Tools and Industry Guides

Tapered Bore 1:12 K Calculator

Check 1:12 adapter sleeve matching for K-bore installations.

Conveyors & Cranes Hub

Compare self-aligning ball vs 222/232 spherical roller pulleys.

12/13/22/23 & 1:12 K Sleeve Guide

Compare ISO 12/13/22/23 series, H208–H2312 adapter sleeves & ball protrusion checks.

Engineering and Procurement FAQ

When should engineers select a self-aligning ball bearing over a spherical roller bearing?

Choose self-aligning ball bearings (12/13/22/23 series) for light-to-moderate radial loads, high speeds, low frictional torque, and 2°–3° shaft deflection (fans, textile shafts, light conveyors). Choose 222/232 spherical roller bearings for heavy shock loads.

What bore taper do K-suffix self-aligning ball bearings use?

Self-aligning ball bearings with the K suffix strictly use a 1:12 tapered bore mounted on ISO 2982-1 H2xx, H3xx, or H23xx adapter sleeves (never 1:30 K30).

What mounting check is critical on open 13xx and 23xx series sizes?

On certain wide-angle open 13xx and 23xx self-aligning ball bearings, the balls protrude slightly past the ring side faces—verify adjacent locknut, spacer, and housing seal clearance on your assembly drawing.

How are cage materials and load ratings confirmed when ordering?

Boundary dimensions conform strictly to ISO 15; cage execution (stamped steel, glass-fiber polyamide TN9 with ~120°C limit, or machined brass), seals (-2RS), and exact dynamic/static ratings are confirmed on your quotation drawing.

FACTORY DIRECT SUPPLY

Need Technical Confirmation or Factory Export Pricing?

Send your bearing designations, dimensional drawings, clearance requirements, and destination port to our Wafangdian factory and Ningbo export teams.

Scroll to Top