Spherical Plain Bearings

ISO 12240-1 Series E · GE25ES-2RS – GE120ES-2RS12 Verified ModelsBore 25–120 mm

Maintenance-relubricated steel-on-steel radial spherical plain bearings with phosphated MoS2 sliding contact and dual 2RS lip seals, built for oscillating hydraulic cylinder clevises, forestry booms, cranes, and off-highway articulated pivots.

Standard & WidthsISO 12240-1 Series E · Dual Widths B (Inner) / C (Outer)
Contact MechanicsOscillating Sliding Wear (p·v) · Not Rolling ISO 281
Mounting RedlineOrient Outer-Ring Fracture Plane 90° Off Primary Load
  • Spherical Plain Bearings

    GE100ES-2RS Spherical Plain Bearing 100 × 150 × 70/55 mm

    GE100ES-2RS heavy sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 100 × 150 × 70/55 mm) built for underground mining haul-truck suspension struts and dump-body hoist cylinders withstanding massive 100 mm pin bending and extreme rock-haulage shock peaks. Sliding specs confirmed on factory drawing.

  • Spherical Plain Bearings

    GE120ES-2RS Spherical Plain Bearing 120 × 180 × 85/70 mm

    GE120ES-2RS large-bore sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 120 × 180 × 85/70 mm) built for hydroelectric spillway radial-gate hydraulic trunnions and heavy offshore jack-up linkages handling colossal ultra-slow static clamping forces. Exact sliding specs confirmed on factory drawing.

  • Spherical Plain Bearings

    GE25ES-2RS Spherical Plain Bearing 25 × 42 × 20/16 mm

    GE25ES-2RS sealed steel-on-steel radial spherical plain bearing (ISO 12240-1 Series E, 25 × 42 × 20/16 mm) engineered for compact agricultural wheel-loader articulated steering cylinders and hydraulic bucket linkages facing wet soil, slurry, and fertilizer splash.

  • Spherical Plain Bearings

    GE30ES-2RS Spherical Plain Bearing 30 × 47 × 22/18 mm

    GE30ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 30 × 47 × 22/18 mm) built for compact forklift mast tilt-cylinder rod eyes and hydrostatic rear-axle steering linkages. Supplied with double-lip contact seals and relubrication passages; full sliding load ratings confirmed on factory drawing.

  • Spherical Plain Bearings

    GE35ES-2RS Spherical Plain Bearing 35 × 55 × 25/20 mm

    GE35ES-2RS sealed steel-on-steel radial spherical plain bearing (ISO 12240-1 Series E, 35 × 55 × 25/20 mm) suited for mobile aerial work platform (boom lift) basket-leveling cylinder clevis eyes requiring vibration-resistant static holding and anti-fretting protection.

  • Spherical Plain Bearings

    GE40ES-2RS Spherical Plain Bearing 40 × 62 × 28/22 mm

    GE40ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 40 × 62 × 28/22 mm) engineered for hydraulic excavator bucket cylinders and skid-steer boom pivots exposed to abrasive clay, silica grit, and violent digging breakout shocks. Full sliding capacities confirmed on factory drawing.

  • Spherical Plain Bearings

    GE45ES-2RS Spherical Plain Bearing 45 × 68 × 32/25 mm

    GE45ES-2RS sealed steel-on-steel radial spherical plain bearing (ISO 12240-1 Series E, 45 × 68 × 32/25 mm) built for forestry log-grapple claws and timber forwarder boom pivots enduring violent off-axis trunk-swing shocks, bark splinters, and sticky conifer resin.

  • Spherical Plain Bearings

    GE50ES-2RS Spherical Plain Bearing 50 × 75 × 35/28 mm

    GE50ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 50 × 75 × 35/28 mm) suited for mobile crane boom luffing cylinders and hydraulic stabilizer outrigger hinges enduring prolonged static holding loads. Sliding load ratings, clearance, and surface treatment confirmed on factory drawing.

  • Spherical Plain Bearings

    GE60ES-2RS Spherical Plain Bearing 60 × 90 × 44/36 mm

    GE60ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 60 × 90 × 44/36 mm) designed for heavy agricultural combine header lift linkages and forestry harvester chassis articulations facing crop chaff, sticky sap, and severe terrain twist. Sliding capacities confirmed on factory drawing.

  • Spherical Plain Bearings

    GE70ES-2RS Spherical Plain Bearing 70 × 105 × 49/40 mm

    GE70ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 70 × 105 × 49/40 mm) built for port container reach-stacker lift cylinders and shipboard cargo hatch-cover hydraulic actuators exposed to marine salt spray and heavy cyclic lifting. Sliding ratings confirmed on factory drawing.

  • Spherical Plain Bearings

    GE80ES-2RS Spherical Plain Bearing 80 × 120 × 55/45 mm

    GE80ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 80 × 120 × 55/45 mm) suited for steel-mill continuous caster mold-oscillator linkages and ladle-turret hydraulic hinges enduring radiant heat, iron-oxide mill scale, and short-stroke cyclic oscillation. Exact specs confirmed on factory drawing.

  • Spherical Plain Bearings

    GE90ES-2RS Spherical Plain Bearing 90 × 130 × 60/50 mm

    GE90ES-2RS heavy-bore sealed steel-on-steel radial spherical plain bearing (ISO 12240-1 Series E, 90 × 130 × 60/50 mm) built for offshore deck crane luffing cylinder trunnions and hydropower spillway radial gate hinges carrying extreme static radial and tilting loads.

ISO 12240-1 · STEEL-ON-STEEL SLIDING PIVOTS

Radial Spherical Plain Bearing Selection Matrix (GE30ES-2RS to GE120ES-2RS)

ISO 12240-1 Series E steel-on-steel sliding bearings with double-lip contact seals (-2RS) for oscillating, tilting, and high-impact pin joints.

Series Engineering Matrix

ZQM Verified Engineering Basis
Bearing Series Load & Structure Profile Bore / Dimension Rule Typical Heavy-Duty Equipment Direct Resource
GE30ES-2RS / GE40ES-2RS 30–40 mm bore compact sealed pivot ISO 12240-1 d × D × B/C Forklift tilt cylinders, excavator bucket & loader linkages View Specs
GE50ES-2RS / GE60ES-2RS 50–60 mm bore heavy boom & header joint ISO 12240-1 d × D × B/C Mobile crane luffing cylinders, combine & forestry hinges View Specs
GE70ES-2RS / GE80ES-2RS 70–80 mm bore marine & steel-mill joint ISO 12240-1 d × D × B/C Port reach-stackers, hatch actuators, caster oscillators View Specs
GE100ES-2RS / GE120ES-2RS 100–120 mm heavy mining & hydro pivot ISO 12240-1 d × D × B/C Mining haul-truck struts, dam radial-gate trunnions View Specs

Critical Sliding-Bearing Rule: GE..ES-2RS is a steel-on-steel sliding plain bearing (governed by specific pressure × sliding velocity p·v, NOT ISO 281 L10h rolling fatigue). Position the single outer-ring fracture plane at 90° to the primary radial load zone during housing installation.

Connected Engineering Tools and Industry Guides

Construction Machinery Hub

Excavator, crane, and off-highway pivot bearing selection.

Quality Control & Lab Inspection

Explore ZQM dimensional, hardness, and NDT inspection standards.

GE..ES-2RS Selection & PV Guide

PV wear calculation, 90° outer-ring fracture-plane rule & MoS2 lubrication guide.

Engineering and Procurement FAQ

What do the ES and -2RS suffixes mean on ISO 12240-1 spherical plain bearings?

ES indicates hardened steel-on-steel sliding contact surfaces (phosphate / MoS2 treated) with annular lubrication grooves and holes in both rings requiring periodic relubrication. -2RS denotes double-lip contact seals on both sides to retain grease and exclude mud or dust.

Why does a GE..ES-2RS bearing list two widths (B and C)?

The inner ring width B is wider than the outer ring width C (for example 50 × 75 × 35/28 mm on GE50ES-2RS) to provide mechanical clearance for angular tilting and self-alignment without edge interference.

How must the fractured outer ring be oriented during installation?

The outer ring is radially fractured at one location for assembly. Always align that fracture plane at 90° (perpendicular) to the primary radial load direction so heavy shock loads never bear directly on the split.

Can GE..ES-2RS spherical plain bearings be evaluated with ISO 281 L10h calculators?

No. Spherical plain bearings operate via sliding contact rather than rolling fatigue; service life depends on specific bearing load (p), sliding velocity (v), oscillation angle, and relubrication intervals.

FACTORY DIRECT SUPPLY

Need Technical Confirmation or Factory Export Pricing?

Send your bearing designations, dimensional drawings, clearance requirements, and destination port to our Wafangdian factory and Ningbo export teams.

Scroll to Top