23148 CA/W33 Spherical Roller Bearing Overview
Engineered for high-torque 240 mm mill and crusher shafts where housing deflection cannot be eliminated, 23148 CA/W33 packs symmetrical self-aligning rollers inside a 240 × 400 × 128 mm envelope weighing 66.9 kg. Catalogue ratings reach 1,790 kN dynamic and 3,100 kN static capacity, sustaining continuous grease rotation to 670 rpm or oil-bath speeds to 850 rpm.
23148CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 240 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 400 mm |
| Boundary Dimensions & Weight | Width (B) | 128 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 66.9 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 1790 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 3100 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 670 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 850 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 258 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 382 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 4 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 3 mm |
| Calculation Factors | Calculation factor (e) | 0.3 |
| Calculation Factors | Axial load factor (static) (Y0) | 2.2 |
| Calculation Factors | Axial load factor (Y1) | 2.2 |
| Calculation Factors | Axial load factor (Y2) | 3.3 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Designation Breakdown & 240 mm Bore Selection
Key execution codes for 23148 CA/W33 and engineering comparison across 240 mm bore catalogue alternatives:
| Attribute | Code / Option | Engineering Notes |
|---|---|---|
| CA / W33 Structure | 23148 CA/W33 |
One-piece machined brass cage (CA), symmetrical rollers, annular outer-ring oil groove and 3 lube holes (W33) |
| Radial Clearance | C0 (Normal) / C3 / C4 | C3 recommended for heated journals or sleeve clamping; C4 reserved for vibrating-screen eccentrics |
| Bore Execution | Cylindrical / Tapered (1:12 K) | Straight bore standard; optional 1:12 tapered bore (K) mounts via adapter or withdrawal sleeves |
Among 240 mm bore spherical choices, 23148 CA/W33 bridges compact 23048 (32.6 kg, Cr 1,160 kN) and ultra-wide 23248 (106 kg, Cr 2,440 kN), adding 54% more dynamic rating than 23048 without jumping to a 440 mm housing.
| Catalogue Unit | Envelope & Mass | Ratings & Grease Limit |
|---|---|---|
| 23148CA/W33 (Current) | 240 × 400 × 128 mm · 66.9 kg | Cr 1,790 kN · C0r 3,100 kN · 670 rpm |
| 23048CA/W33 | 240 × 360 × 92 mm · 32.6 kg | Cr 1,160 kN · C0r 2,140 kN · 850 rpm |
| 24048CA/W33 | 240 × 360 × 118 mm · 43.4 kg | Cr 1,390 kN · C0r 2,730 kN · 710 rpm |
| 23248CA/W33 | 240 × 440 × 160 mm · 106 kg | Cr 2,440 kN · C0r 4,050 kN · 630 rpm |
Brand Cross-Reference & Interchangeability
Manufacturer designations sharing the 240 × 400 × 128 mm nominal ISO boundary envelope (full product catalog):
| Manufacturer | Reference Code | Verification Scope |
|---|---|---|
| ZQM Bearings | 23148 CA/W33 |
Machined brass CA cage & W33 lube groove per ISO 15 envelope |
| SKF | 23148 CC/W33 | Explorer series reference; confirm stamped steel vs brass cage |
| FAG / Schaeffler | 23148-E1-XL-MB1 | E1/X-life spherical series with MB1 brass cage |
| NSK | 23148CAME4 | EA / CAME4 high-capacity brass-cage execution |
| NTN / Timken | 23148EMD1 / 23148EJW33 | Heavy-duty industrial spherical series peer |
Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (240 × 400 × 128 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.
Industrial Applications & Mounting Guidance (240 mm Shaft Class)
Primary machinery roles and field mounting practices matched to this 240 × 400 × 128 mm assembly:
| Target Machinery | Operating Duty Profile | Mounting & Lubrication Practice |
|---|---|---|
| Primary Jaw & Gyratory Rock Crushers | Severe quarry impact spikes plus eccentric shaft bending up to 670 rpm | Use pressurized W33 circulation through the outer annulus and check residual radial play post-mount |
| Cement Kiln Support & Tube Mill Pinions | Continuous heavy torque under elevated ambient kiln shell radiation | Order C3 clearance with 1:12 tapered K sleeve adaptation to prevent thermal seizure |
| Mining Conveyor Head Pulleys | Sustained belt tension with foundation settlement misalignment | Mount inside plummer blocks using labyrinth grease seals and 110 °C induction heating |
For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.
Pre-Order Engineering Checklist
Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 240 × 400 × 128 mm model:
| Checkpoint | Parameters to Confirm | Engineering Purpose |
|---|---|---|
| 1. Code & Clearance | Specify 23148 CA/W33, C0/C3/C4 play, and 1:12 K bore |
Aligns mounted internal play with shaft interference and running ΔT |
| 2. Shoulder & Fit Limits | Verify da 258 mm, Da 382 mm, r1,2 min 4 mm, ra max 3 mm | Prevents chamfer interference and inner-ring creep |
| 3. Quantity & QC Scope | Unit mass 66.9 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs | Confirms pallet crating, MOQ lead time, and inspection records |
Frequently Asked Questions
What dimensions and mass define 23148 CA/W33?
Catalogue records list 240 mm bore, 400 mm outside diameter, 128 mm width, and 66.9 kg unit mass.
How does the 231 series differ from 230 and 232 on 240 mm shafts?
With 400 mm OD and 128 mm width, it delivers Cr 1,790 kN—54% higher than 23048 (360 mm OD) while remaining 39.1 kg lighter than 23248 (440 mm OD).
Which shoulder and fillet limits apply during assembly?
Machine shaft shoulder da min >= 258 mm, housing abutment Da max <= 382 mm, maximum fillet ra = 4 mm.
Why check C3 clearance, crating, and UT QC before ordering 240 mm units?
A 240 mm press fit or 1:12 K sleeve drive-up noticeably reduces internal play, so crusher and kiln users routinely specify C3 clearance. Confirm palletized wooden export cases, batch MOQ, and CMM/hardness/UT inspection sheets with ZQM sales.






