Spherical roller bearings
24952CA/W33 Spherical Roller Bearing Dimensions & Specifications
24952CA/W33 spherical roller bearing: 260 mm bore (d), 360 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 260 mm |
|---|---|
| Outside diameter D | 360 mm |
| Width B | 100 mm |
| Mass | 32 kg |
| Catalogue dynamic load Cr | 1070 kN |
| Catalogue static load Cor | 2375 kN |
| Grease-lubricated speed grease | 850 rpm |
| Oil-lubricated speed oil | 1100 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 348 mm |
|---|---|
| Abutment dimension da da | 272 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 2.8 |
| Factor Y1 Y1 | 2.8 |
| Factor Y2 Y2 | 4.2 |
| Factor e e | 0.24 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24952CA/W33?
The 24952CA/W33 catalogue lists da = 272 mm; Da = 348 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24952CA/W33?
The listed values for 24952CA/W33 are grease: 850 rpm; oil: 1100 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24952CA/W33?
The catalogue reference mass for 24952CA/W33 is 32 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.