Spherical roller bearings
24956CA/W33 Spherical Roller Bearing Dimensions & Specifications
24956CA/W33 spherical roller bearing: 280 mm bore (d), 380 mm outside diameter (D), 100 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 280 mm |
|---|---|
| Outside diameter D | 380 mm |
| Width B | 100 mm |
| Mass | 34.5 kg |
| Catalogue dynamic load Cr | 1016 kN |
| Catalogue static load Cor | 2327 kN |
| Grease-lubricated speed grease | 800 rpm |
| Oil-lubricated speed oil | 1000 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da Da | 368 mm |
|---|---|
| Abutment dimension da da | 292 mm |
| Minimum chamfer r12 r12 | 2.1 mm |
| Factor Y0 Y0 | 2.8 |
| Factor Y1 Y1 | 2.9 |
| Factor Y2 Y2 | 4.4 |
| Factor e e | 0.23 |
| Maximum fillet ra ra | 2 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 24956CA/W33?
The 24956CA/W33 catalogue lists da = 292 mm; Da = 368 mm; ra ≤ 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 24956CA/W33?
The listed values for 24956CA/W33 are grease: 800 rpm; oil: 1000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 24956CA/W33?
The catalogue reference mass for 24956CA/W33 is 34.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.