Deep groove ball bearings
6076 Deep Groove Ball Bearing Dimensions & Specifications
6076 deep groove ball bearing: 380 mm bore (d), 560 mm outside diameter (D), 82 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 380 mm |
|---|---|
| Outside diameter D | 560 mm |
| Width B | 82 mm |
| Mass | 68.5 kg |
| Catalogue dynamic load Cr | 455 kN |
| Catalogue static load Cor | 725 kN |
| Grease-lubricated speed grease | 950 rpm |
| Oil-lubricated speed oil | 1200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 529 mm |
|---|---|
| Abutment dimension da da | 416 mm |
| Minimum chamfer r12 r12 | 5.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 4 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6076?
The 6076 catalogue lists da = 416 mm; Da = 529 mm; ra ≤ 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6076?
The listed values for 6076 are grease: 950 rpm; oil: 1200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6076?
The catalogue reference mass for 6076 is 68.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.