Deep groove ball bearings
619/1320F1 Deep Groove Ball Bearing Dimensions & Specifications
619/1320F1 deep groove ball bearing: 1320 mm bore (d), 1720 mm outside diameter (D), 128 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1320 mm |
|---|---|
| Outside diameter D | 1720 mm |
| Width B | 128 mm |
| Mass | 830 kg |
| Catalogue dynamic load Cr | 1210 kN |
| Catalogue static load Cor | 4050 kN |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1687 mm |
|---|---|
| Abutment dimension da da | 1353 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/1320F1?
The 619/1320F1 catalogue lists da = 1353 mm; Da = 1687 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 619/1320F1?
The catalogue reference mass for 619/1320F1 is 830 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.