Deep groove ball bearings
619/1400F1 Deep Groove Ball Bearing Dimensions & Specifications
619/1400F1 deep groove ball bearing: 1400 mm bore (d), 1820 mm outside diameter (D), 185 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1400 mm |
|---|---|
| Outside diameter D | 1820 mm |
| Width B | 185 mm |
| Mass | 1250 kg |
| Catalogue dynamic load Cr | 1590 kN |
| Catalogue static load Cor | 5500 kN |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1780 mm |
|---|---|
| Abutment dimension da da | 1440 mm |
| Minimum chamfer r12 r12 | 9.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 8 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/1400F1?
The 619/1400F1 catalogue lists da = 1440 mm; Da = 1780 mm; ra ≤ 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 619/1400F1?
The catalogue reference mass for 619/1400F1 is 1250 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.