Deep groove ball bearings
619/1060F1 Deep Groove Ball Bearing Dimensions & Specifications
619/1060F1 deep groove ball bearing: 1060 mm bore (d), 1400 mm outside diameter (D), 150 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1060 mm |
|---|---|
| Outside diameter D | 1400 mm |
| Width B | 150 mm |
| Mass | 620 kg |
| Catalogue dynamic load Cr | 1010 kN |
| Catalogue static load Cor | 3000 kN |
| Grease-lubricated speed grease | 280 rpm |
| Oil-lubricated speed oil | 340 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1367 mm |
|---|---|
| Abutment dimension da da | 1093 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/1060F1?
The 619/1060F1 catalogue lists da = 1093 mm; Da = 1367 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/1060F1?
The listed values for 619/1060F1 are grease: 280 rpm; oil: 340 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/1060F1?
The catalogue reference mass for 619/1060F1 is 620 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.