Deep groove ball bearings
619/1180F1 Deep Groove Ball Bearing Dimensions & Specifications
619/1180F1 deep groove ball bearing: 1180 mm bore (d), 1540 mm outside diameter (D), 160 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1180 mm |
|---|---|
| Outside diameter D | 1540 mm |
| Width B | 160 mm |
| Mass | 775 kg |
| Catalogue dynamic load Cr | 1140 kN |
| Catalogue static load Cor | 3600 kN |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1507 mm |
|---|---|
| Abutment dimension da da | 1213 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/1180F1?
The 619/1180F1 catalogue lists da = 1213 mm; Da = 1507 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 619/1180F1?
The catalogue reference mass for 619/1180F1 is 775 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.