Deep groove ball bearings
6320M Deep Groove Ball Bearing Dimensions & Specifications
6320M deep groove ball bearing: 100 mm bore (d), 215 mm outside diameter (D), 47 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 100 mm |
|---|---|
| Outside diameter D | 215 mm |
| Width B | 47 mm |
| Mass | 8.89 kg |
| Catalogue dynamic load Cr | 173 kN |
| Catalogue static load Cor | 141 kN |
| Grease-lubricated speed grease | 3000 rpm |
| Oil-lubricated speed oil | 3600 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 202 mm |
|---|---|
| Abutment dimension da da | 113 mm |
| Minimum chamfer r12 r12 | 3.0 mm |
| Factor f0 f0 | 13 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6320M?
The 6320M catalogue lists da = 113 mm; Da = 202 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6320M?
The listed values for 6320M are grease: 3000 rpm; oil: 3600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6320M?
The catalogue reference mass for 6320M is 8.89 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.