Deep groove ball bearings
6326M Deep Groove Ball Bearing Dimensions & Specifications
6326M deep groove ball bearing: 130 mm bore (d), 280 mm outside diameter (D), 58 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 280 mm |
| Width B | 58 mm |
| Mass | 18.3 kg |
| Catalogue dynamic load Cr | 228 kN |
| Catalogue static load Cor | 214 kN |
| Grease-lubricated speed grease | 2200 rpm |
| Oil-lubricated speed oil | 2800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 264 mm |
|---|---|
| Abutment dimension da da | 146 mm |
| Minimum chamfer r12 r12 | 4.0 mm |
| Factor f0 f0 | 14 |
| Maximum fillet ra ra | 3 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6326M?
The 6326M catalogue lists da = 146 mm; Da = 264 mm; ra ≤ 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6326M?
The listed values for 6326M are grease: 2200 rpm; oil: 2800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6326M?
The catalogue reference mass for 6326M is 18.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.