Deep groove ball bearings
6324 Deep Groove Ball Bearing Dimensions & Specifications
6324 deep groove ball bearing: 120 mm bore (d), 260 mm outside diameter (D), 55 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 120 mm |
|---|---|
| Outside diameter D | 260 mm |
| Width B | 55 mm |
| Mass | 12.2 kg |
| Catalogue dynamic load Cr | 208 kN |
| Catalogue static load Cor | 186 kN |
| Grease-lubricated speed grease | 2400 rpm |
| Oil-lubricated speed oil | 3000 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 247 mm |
|---|---|
| Abutment dimension da da | 133 mm |
| Minimum chamfer r12 r12 | 3.0 mm |
| Factor f0 f0 | 13 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6324?
The 6324 catalogue lists da = 133 mm; Da = 247 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6324?
The listed values for 6324 are grease: 2400 rpm; oil: 3000 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6324?
The catalogue reference mass for 6324 is 12.2 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.