Deep groove ball bearings
6322 Deep Groove Ball Bearing Dimensions & Specifications
6322 deep groove ball bearing: 110 mm bore (d), 240 mm outside diameter (D), 50 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 110 mm |
|---|---|
| Outside diameter D | 240 mm |
| Width B | 50 mm |
| Mass | 9.49 kg |
| Catalogue dynamic load Cr | 205 kN |
| Catalogue static load Cor | 179 kN |
| Grease-lubricated speed grease | 2600 rpm |
| Oil-lubricated speed oil | 3200 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 227 mm |
|---|---|
| Abutment dimension da da | 123 mm |
| Minimum chamfer r12 r12 | 3.0 mm |
| Factor f0 f0 | 13 |
| Maximum fillet ra ra | 2.5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 6322?
The 6322 catalogue lists da = 123 mm; Da = 227 mm; ra ≤ 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 6322?
The listed values for 6322 are grease: 2600 rpm; oil: 3200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 6322?
The catalogue reference mass for 6322 is 9.49 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.