22322 CA/W33 Spherical Roller Bearing Overview
Built around a deep, wide 223-series cross-section for 110 mm high-impact shafts, 22322 CA/W33 measures 110 × 240 × 80 mm at 17.6 kg. Its large symmetrical rollers and solid brass cage deliver Cr = 825 kN, Cor = 1,120 kN, and high-speed thresholds of 1,700 rpm grease / 2,200 rpm oil.
22322CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 110 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 240 mm |
| Boundary Dimensions & Weight | Width (B) | 80 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 17.6 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 825 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 1120 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 1700 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 2200 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 124 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 226 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 3 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 2.5 mm |
| Calculation Factors | Calculation factor (e) | 0.33 |
| Calculation Factors | Axial load factor (static) (Y0) | 2 |
| Calculation Factors | Axial load factor (Y1) | 2.1 |
| Calculation Factors | Axial load factor (Y2) | 3.1 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Designation Breakdown & 110 mm Bore Selection
Key execution codes for 22322 CA/W33 and engineering comparison across 110 mm bore catalogue alternatives:
| Attribute | Code / Option | Engineering Notes |
|---|---|---|
| CA / W33 Structure | 22322 CA/W33 |
One-piece machined brass cage (CA), symmetrical rollers, annular outer-ring oil groove and 3 lube holes (W33) |
| Radial Clearance | C0 (Normal) / C3 / C4 | C3 recommended for heated journals or sleeve clamping; C4 reserved for vibrating-screen eccentrics |
| Bore Execution | Cylindrical / Tapered (1:12 K) | Straight bore standard; optional 1:12 tapered bore (K) mounts via adapter or withdrawal sleeves |
Across 110 mm spherical models, 22322 CA/W33 delivers 70% more dynamic capacity than 22222 (Cr 485 kN, 6.99 kg) and nearly triple the dynamic capacity of slim 23022 (Cr 293 kN, 3.76 kg).
| Catalogue Unit | Envelope & Mass | Ratings & Grease Limit |
|---|---|---|
| 22322CA/W33 (Current) | 110 × 240 × 80 mm · 17.6 kg | Cr 825 kN · C0r 1,120 kN · 1,700 rpm |
| 22222CA/W33 | 110 × 200 × 53 mm · 6.99 kg | Cr 485 kN · C0r 645 kN · 2,200 rpm |
| 23022CA/W33 | 110 × 170 × 45 mm · 3.76 kg | Cr 293 kN · C0r 465 kN · 2,000 rpm |
| 23122CA/W33 | 110 × 180 × 56 mm · 5.7 kg | Cr 385 kN · C0r 630 kN · 1,600 rpm |
Brand Cross-Reference & Interchangeability
Manufacturer designations sharing the 110 × 240 × 80 mm nominal ISO boundary envelope (full product catalog):
| Manufacturer | Reference Code | Verification Scope |
|---|---|---|
| ZQM Bearings | 22322 CA/W33 |
Machined brass CA cage & W33 lube groove per ISO 15 envelope |
| SKF | 22322 CC/W33 | Explorer series reference; confirm stamped steel vs brass cage |
| FAG / Schaeffler | 22322-E1-XL-MB1 | E1/X-life spherical series with MB1 brass cage |
| NSK | 22322CAME4 | EA / CAME4 high-capacity brass-cage execution |
| NTN / Timken | 22322EMD1 / 22322EJW33 | Heavy-duty industrial spherical series peer |
Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (110 × 240 × 80 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.
Industrial Applications & Mounting Guidance (110 mm Shaft Class)
Primary machinery roles and field mounting practices matched to this 110 × 240 × 80 mm assembly:
| Target Machinery | Operating Duty Profile | Mounting & Lubrication Practice |
|---|---|---|
| Quarry Vibrating Screens & Grizzly Feeders | Sustained centrifugal G-force accelerations plus eccentric shaft whip | Use C4/C3 radial play and synthetic EP oil-bath or frequent W33 grease replenishment |
| Cone & Impact Crusher Eccentric Countershafts | Severe shock spikes alongside 1,700 rpm rotation | Verify 1:12 K adapter sleeve clamping and inspect brass cage pocket wear at overhaul |
| Heavy Mining Slurry Pumps & Gear Reducers | High radial impeller loads with shaft deflection | Seat shaft shoulder to da min 124 mm and keep housing fillet ra <= 2.5 mm |
For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.
Pre-Order Engineering Checklist
Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 110 × 240 × 80 mm model:
| Checkpoint | Parameters to Confirm | Engineering Purpose |
|---|---|---|
| 1. Code & Clearance | Specify 22322 CA/W33, C0/C3/C4 play, and 1:12 K bore |
Aligns mounted internal play with shaft interference and running ΔT |
| 2. Shoulder & Fit Limits | Verify da 124 mm, Da 226 mm, r1,2 min 3 mm, ra max 2.5 mm | Prevents chamfer interference and inner-ring creep |
| 3. Quantity & QC Scope | Unit mass 17.6 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs | Confirms pallet crating, MOQ lead time, and inspection records |
Frequently Asked Questions
What are the exact size and weight of 22322 CA/W33?
ZQM catalogue specs record 110 mm bore, 240 mm outside diameter, 80 mm width, and 17.6 kg unit mass.
Why select heavy-series 22322 over 22222 on 110 mm vibrating equipment?
With 240 mm OD and 80 mm width, 22322 delivers Cr = 825 kN (vs 485 kN on 22222) and resists cyclic G-force fatigue in vibrating screens and impact crushers.
What shaft and housing shoulder dimensions apply to 22322 CA/W33?
Specify shaft abutment da min >= 124 mm, housing shoulder Da max <= 226 mm, maximum fillet ra = 3 mm.
Why do vibrating-screen buyers specify C4 clearance and UT checks on 22322?
Vibrating exciters generate steep inner-ring heating and centrifugal roller stress, so C3 or C4 clearance is standard alongside forged brass cages. Contact ZQM to confirm batch MOQ, export cartons/pallets, and CMM/UT/hardness records.






