22322 CA/W33 Spherical Roller Bearing 110 × 240 × 80 mm

22322 CA/W33 spherical roller bearing: 110 × 240 × 80 mm, machined brass (ca), dynamic rating Cr 825 kN, static rating Cor 1,120 kN, reference mass 17.6 kg. Verify shaft drawings and request bulk factory pricing from ZQM.

Request a Quote

22322 CA/W33 Spherical Roller Bearing Overview

Built around a deep, wide 223-series cross-section for 110 mm high-impact shafts, 22322 CA/W33 measures 110 × 240 × 80 mm at 17.6 kg. Its large symmetrical rollers and solid brass cage deliver Cr = 825 kN, Cor = 1,120 kN, and high-speed thresholds of 1,700 rpm grease / 2,200 rpm oil.

Envelope (d × D × B)110 × 240 × 80 mm
Dynamic / Static RatingCr 825 / C0r 1,120 kN
Limiting Speed (Grease / Oil)1,700 / 2,200 rpm
Reference Mass · Execution17.6 kg · Machined Brass (CA)

22322CA/W33 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 22322CA/W33
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)110 mm
Boundary Dimensions & WeightOutside diameter (D)240 mm
Boundary Dimensions & WeightWidth (B)80 mm
Boundary Dimensions & WeightReference mass (Weight)17.6 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)825 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)1120 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)1700 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)2200 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)124 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)226 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)3 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)2.5 mm
Calculation FactorsCalculation factor (e)0.33
Calculation FactorsAxial load factor (static) (Y0)2
Calculation FactorsAxial load factor (Y1)2.1
Calculation FactorsAxial load factor (Y2)3.1

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Designation Breakdown & 110 mm Bore Selection

Key execution codes for 22322 CA/W33 and engineering comparison across 110 mm bore catalogue alternatives:

Attribute Code / Option Engineering Notes
CA / W33 Structure 22322 CA/W33 One-piece machined brass cage (CA), symmetrical rollers, annular outer-ring oil groove and 3 lube holes (W33)
Radial Clearance C0 (Normal) / C3 / C4 C3 recommended for heated journals or sleeve clamping; C4 reserved for vibrating-screen eccentrics
Bore Execution Cylindrical / Tapered (1:12 K) Straight bore standard; optional 1:12 tapered bore (K) mounts via adapter or withdrawal sleeves

Across 110 mm spherical models, 22322 CA/W33 delivers 70% more dynamic capacity than 22222 (Cr 485 kN, 6.99 kg) and nearly triple the dynamic capacity of slim 23022 (Cr 293 kN, 3.76 kg).

Catalogue Unit Envelope & Mass Ratings & Grease Limit
22322CA/W33 (Current) 110 × 240 × 80 mm · 17.6 kg Cr 825 kN · C0r 1,120 kN · 1,700 rpm
22222CA/W33 110 × 200 × 53 mm · 6.99 kg Cr 485 kN · C0r 645 kN · 2,200 rpm
23022CA/W33 110 × 170 × 45 mm · 3.76 kg Cr 293 kN · C0r 465 kN · 2,000 rpm
23122CA/W33 110 × 180 × 56 mm · 5.7 kg Cr 385 kN · C0r 630 kN · 1,600 rpm

Brand Cross-Reference & Interchangeability

Manufacturer designations sharing the 110 × 240 × 80 mm nominal ISO boundary envelope (full product catalog):

Manufacturer Reference Code Verification Scope
ZQM Bearings 22322 CA/W33 Machined brass CA cage & W33 lube groove per ISO 15 envelope
SKF 22322 CC/W33 Explorer series reference; confirm stamped steel vs brass cage
FAG / Schaeffler 22322-E1-XL-MB1 E1/X-life spherical series with MB1 brass cage
NSK 22322CAME4 EA / CAME4 high-capacity brass-cage execution
NTN / Timken 22322EMD1 / 22322EJW33 Heavy-duty industrial spherical series peer

Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (110 × 240 × 80 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.

Industrial Applications & Mounting Guidance (110 mm Shaft Class)

Primary machinery roles and field mounting practices matched to this 110 × 240 × 80 mm assembly:

Target Machinery Operating Duty Profile Mounting & Lubrication Practice
Quarry Vibrating Screens & Grizzly Feeders Sustained centrifugal G-force accelerations plus eccentric shaft whip Use C4/C3 radial play and synthetic EP oil-bath or frequent W33 grease replenishment
Cone & Impact Crusher Eccentric Countershafts Severe shock spikes alongside 1,700 rpm rotation Verify 1:12 K adapter sleeve clamping and inspect brass cage pocket wear at overhaul
Heavy Mining Slurry Pumps & Gear Reducers High radial impeller loads with shaft deflection Seat shaft shoulder to da min 124 mm and keep housing fillet ra <= 2.5 mm

For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.

Pre-Order Engineering Checklist

Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 110 × 240 × 80 mm model:

Checkpoint Parameters to Confirm Engineering Purpose
1. Code & Clearance Specify 22322 CA/W33, C0/C3/C4 play, and 1:12 K bore Aligns mounted internal play with shaft interference and running ΔT
2. Shoulder & Fit Limits Verify da 124 mm, Da 226 mm, r1,2 min 3 mm, ra max 2.5 mm Prevents chamfer interference and inner-ring creep
3. Quantity & QC Scope Unit mass 17.6 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs Confirms pallet crating, MOQ lead time, and inspection records

Ready for drawing review, clearance matching, or factory bulk quotation on this 110 mm shaft unit?

Request Technical Quote

Frequently Asked Questions

What are the exact size and weight of 22322 CA/W33?

ZQM catalogue specs record 110 mm bore, 240 mm outside diameter, 80 mm width, and 17.6 kg unit mass.

Why select heavy-series 22322 over 22222 on 110 mm vibrating equipment?

With 240 mm OD and 80 mm width, 22322 delivers Cr = 825 kN (vs 485 kN on 22222) and resists cyclic G-force fatigue in vibrating screens and impact crushers.

What shaft and housing shoulder dimensions apply to 22322 CA/W33?

Specify shaft abutment da min >= 124 mm, housing shoulder Da max <= 226 mm, maximum fillet ra = 3 mm.

Why do vibrating-screen buyers specify C4 clearance and UT checks on 22322?

Vibrating exciters generate steep inner-ring heating and centrifugal roller stress, so C3 or C4 clearance is standard alongside forged brass cages. Contact ZQM to confirm batch MOQ, export cartons/pallets, and CMM/UT/hardness records.

Scroll to Top