Heavy-Duty Precision Machine Tools

Heavy-Duty Precision Machine Tool Spindle and Worktable Bearings

Built for heavy CNC gantry milling machines, vertical turning lathe (VTL) rotary worktables, floor-type boring-milling spindles, and heavy roll-grinding heads. ZQM supplies NN30 and NNU49 double-row cylindrical roller bearings (straight bore or 1:12 K tapered bore for clearance adjustment) alongside ISO 355 320X / 322 tapered roller units—with tolerance class and preload confirmed strictly against your spindle drawing.

78+ / 87+NN30 & NNU49 Double-Row Models
1:12 (K)Spindle Tapered Bore Adjustment
120–220 mmFeatured Heavy Spindle Bore Range
ISO 492Precision Class Verified per Drawing

Bearing Selection by Heavy Machine Tool Position

Match CNC main spindles, compact boring quills, VTL rotary worktables, and rear floating supports to verified ZQM architectures.

NN30 double-row cylindrical roller bearing 2D engineering cross-section with three integral inner ribs and rib-free outer ring
CNC Gantry & Boring Main Spindles

High-Rigidity NN30 / NN30..K Main Spindle Front Supports

NN30 double-row cylindrical roller bearings feature three integral inner-ring ribs and a separable rib-free outer ring, maximizing radial stiffness under heavy milling cuts while allowing axial thermal float. Specify 1:12 tapered bore (K) to dial radial clearance to zero or light preload via spacer grinding.

NNU49 double-row cylindrical roller bearing 2D engineering cross-section with three outer ribs, W33 oil groove, and rib-free inner ring
Compact Spindles & Roll Grinders

Ultra-Compact NNU49 / NNU49..K Spindle Supports

Where housing outer diameter is tightly constrained, ISO dimension series 49 NNU49 double-row cylindrical bearings pair a low radial cross-section with three outer-ring ribs, outer-ring lubrication grooves/holes, and a separable rib-free inner ring (straight or 1:12 K tapered bore).

32224 tapered roller bearing representative image for vertical turning lathe rotary tables and boring mills
VTL Rotary Tables & Indexing Heads

Vertical Turning Lathe (VTL) Worktables and Heavy Chucks

Large vertical turning lathes and heavy chucking tables combine massive workpiece weight with eccentric cutting moments. Thin-section ISO 355 320X and heavy 322 tapered roller bearings provide crisp radial/axial support when paired and adjusted via precision ground spacers.

NU cylindrical roller bearing representative image for machine tool rear spindle floating support and feed drives
Rear Floating End & Auxiliary Drives

Spindle Rear Floating Ends and Heavy Gearbox Feed Drives

Because NN30 and NNU49 cylindrical bearings carry radial load only, spindle rear ends and main drive gearboxes rely on NU floating cylindrical bearings alongside dedicated axial thrust bearings to stabilize cutting forces and absorb spindle thermal elongation.

Verified Heavy Machine Tool Spindle and Worktable Bearing Matrix

Verified Specifications · ZQM Engineering Catalogue
Modeld × D × B / T (mm)Cr / C0r (kN)Mass (kg)Structure & Bore NoteDetails
NN3024K120 × 180 × 46 (B)229 / 3903.85Double-row spindle front (3 inner ribs, 1:12 K, 5,000 r/min)View Specs
NN3028K140 × 210 × 53 (B)297 / 5206.20Boring-milling main spindle (3 inner ribs, 1:12 K, 4,300 r/min)View Specs
NN3030K150 × 225 × 56 (B)330 / 5707.50CNC gantry spindle front (3 inner ribs, 1:12 K, 4,000 r/min)View Specs
NN3036K180 × 280 × 74 (B)561 / 1,00016.5Heavy floor-type boring spindle (3 inner ribs, 1:12 K, 3,200 r/min)View Specs
NN3040K200 × 310 × 82 (B)644 / 1,14022.0Large VTL / heavy mill spindle (3 inner ribs, 1:12 K, 2,000 r/min)View Specs
NNU4924K120 × 165 × 45 (B)176 / 3402.80Compact quill spindle (3 outer ribs, 1:12 K, 5,300 r/min)View Specs
NNU4932K160 × 220 × 60 (B)330 / 6806.60Compact roll-grinding head (3 outer ribs, 1:12 K, 4,000 r/min)View Specs
NNU4940K200 × 280 × 80 (B)484 / 1,04015.0Low-section heavy boring spindle (3 outer ribs, 1:12 K, 3,000 r/min)View Specs
32032X160 × 240 × 51 (T)425 / 7507.93VTL rotary table radial/axial support (ISO 355 T, straight bore)View Specs
32044X220 × 340 × 76 (T)885 / 1,61024.4Large heavy-duty VTL worktable (ISO 355 T, straight bore)View Specs

Double-row cylindrical dimensions conform to ISO 15 (width B; straight bore versions NN30 / NNU49 share the same boundary dimensions as 1:12 K tapered-bore models); 320X tapered units conform to ISO 355 (overall width T, straight bore). Precision tolerance grade (ISO 492), radial runout, and matched preload are verified strictly against your spindle drawing prior to manufacture.

Spindle Engineering Notes for Heavy Machine Tools

Key mounting, clearance-setting, and axial-thrust fundamentals for CNC spindle rebuilders and OEM builders.

1. Controlled 1:12 (K) Taper Drive-Up on Hollow Spindles

Pushing an NN30..K or NNU49..K inner ring up a 1:12 tapered spindle journal expands the inner raceway radially to eliminate play or establish light preload. Because hollow spindles compress elastically, verify radial clearance directly with a dial indicator and lock the final position using a precision-ground spacer ring.

Read NN30 1:12 Taper Clearance Guide

2. Pure Radial Support: Always Pair Separate Axial Thrust Units

Both NN30 (rib-free outer ring) and NNU49 (rib-free inner ring) accommodate axial shaft displacement internally and carry radial cutting force only. Pair them with bidirectional angular-contact thrust ball bearings or opposed tapered thrust sets to locate the spindle axially.

Explore NN30 Series Catalog Specs

3. Tapered Worktable Setting & Thermal Preload Balance

VTL worktables and heavy bevel spindle drives using 320X or 322 tapered roller bearings require controlled DB/DF spacer setting so cold preload does not escalate into thermal drag during long finishing passes.

Read Tapered Preload & DB/DF Guide

4. Honesty on Tolerance Classes & Drawing Verification

Precision spindle rebuilds depend on verified ring runout, bore taper contact pattern, and matched radial clearance. Always submit the required ISO 492 tolerance grade (such as P5 / P4 / SP per drawing) rather than assuming standard P0 catalog stock.

Read Bearing Procurement Checklist

Drawing-Verified Supply for Machine Tool OEMs and Spindle Rebuilders

Clear tolerance alignment, honest manufacturing boundaries, and export-ready coordination from Wafangdian.

ZQM precision CNC ring machining facility supporting heavy machine tool bearings
Drawing-Aligned Tolerance & Clearance Verification ZQM reviews every machine-tool inquiry against your target ISO 492 tolerance class, taper gauge contact, radial internal clearance group, and lubrication layout before quoting—ensuring clear engineering expectations with zero unverified precision claims.

Pre-Order Checklist for Machine Tool & Spindle Buyers

Provide these five parameters so engineering can confirm manufacturability and lead time:

  • Full bearing designation (NN30 vs NNU49, straight bore vs 1:12 K taper, or ISO 355 320X/322 tapered code)
  • Required ISO 492 tolerance grade, radial runout limits, and radial internal clearance group (e.g., C1 / C2 / CN per drawing)
  • Spindle or worktable lubrication system (grease, oil-air, or circulating oil) and outer-ring lubrication groove/hole layout
  • Companion axial thrust bearing arrangement and target operating speed / cutting duty
  • Order volume (single spindle rebuild set, matched pair, or OEM serial supply) and inspection report scope
Send Machine Tool Inquiry

Frequently Asked Questions

Key technical answers for CNC gantry OEMs, VTL builders, and spindle repair specialists.

What is the structural difference between NN30..K and NNU49..K double-row spindle bearings?

NN30..K bearings have three integral ribs on the inner ring and a separable rib-free outer ring, offering slightly higher cross-sectional rigidity and serving as the standard choice on heavy CNC milling and boring main spindles. NNU49..K bearings belong to the ultra-compact ISO 49 series with three ribs plus outer-ring lubrication grooves/holes on the outer ring and a separable rib-free inner ring, ideal where radial housing space is tightly restricted.

Can NN30 or NNU49 double-row cylindrical bearings carry axial cutting thrust?

No. Both NN30 and NNU49 designs allow axial displacement internally between rollers and the rib-free ring, so they carry radial load only. Every CNC spindle must pair them with dedicated axial locating bearings (such as bidirectional angular-contact thrust ball bearings or opposed tapered roller sets).

What taper ratio is used on NN30..K and NNU49..K machine-tool spindle bearings?

All standard tapered-bore NN30..K and NNU49..K spindle bearings use a 1:12 taper (K). Never confuse them with the 1:30 taper (K30) used on wide-section 240 and 241 spherical roller bearings.

How are precision tolerance grades confirmed when ordering machine-tool bearings from ZQM?

Catalog dimensions follow ISO 15 (cylindrical) and ISO 355 (tapered). Because heavy machine-tool spindles often specify tighter ISO 492 tolerance grades (such as P5 / P4 / SP) and specific radial clearance groups, submit your full designation or spindle drawing via our Contact page so ZQM engineering confirms tolerance capability and inspection scope before quoting.

Precision Machine Tool Supply

Sourcing NN30, NNU49 or VTL Worktable Bearings?

Send your spindle drawing, tolerance grade, and clearance targets. ZQM engineering verifies dimensions, 1:12 taper requirements, and production lead times before quoting.

Scroll to Top