Deep groove ball bearings
619/1700F1 Deep Groove Ball Bearing Dimensions & Specifications
619/1700F1 deep groove ball bearing: 1700 mm bore (d), 2180 mm outside diameter (D), 212 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1700 mm |
|---|---|
| Outside diameter D | 2180 mm |
| Width B | 212 mm |
| Mass | 1950 kg |
| Catalogue dynamic load Cr | 1990 kN |
| Catalogue static load Cor | 7650 kN |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 2140 mm |
|---|---|
| Abutment dimension da da | 1740 mm |
| Minimum chamfer r12 r12 | 9.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 8 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/1700F1?
The 619/1700F1 catalogue lists da = 1740 mm; Da = 2140 mm; ra ≤ 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 619/1700F1?
The catalogue reference mass for 619/1700F1 is 1950 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.