Deep groove ball bearings
619/750F1 Deep Groove Ball Bearing Dimensions & Specifications
619/750F1 deep groove ball bearing: 750 mm bore (d), 1000 mm outside diameter (D), 112 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 750 mm |
|---|---|
| Outside diameter D | 1000 mm |
| Width B | 112 mm |
| Mass | 245 kg |
| Catalogue dynamic load Cr | 785 kN |
| Catalogue static load Cor | 1840 kN |
| Grease-lubricated speed grease | 480 rpm |
| Oil-lubricated speed oil | 560 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 954 mm |
|---|---|
| Abutment dimension da da | 808 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/750F1?
The 619/750F1 catalogue lists da = 808 mm; Da = 954 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/750F1?
The listed values for 619/750F1 are grease: 480 rpm; oil: 560 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/750F1?
The catalogue reference mass for 619/750F1 is 245 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.