Deep groove ball bearings
619/710F1 Deep Groove Ball Bearing Dimensions & Specifications
619/710F1 deep groove ball bearing: 710 mm bore (d), 950 mm outside diameter (D), 106 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 710 mm |
|---|---|
| Outside diameter D | 950 mm |
| Width B | 106 mm |
| Mass | 208 kg |
| Catalogue dynamic load Cr | 715 kN |
| Catalogue static load Cor | 1640 kN |
| Grease-lubricated speed grease | 500 rpm |
| Oil-lubricated speed oil | 600 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 905 mm |
|---|---|
| Abutment dimension da da | 766 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/710F1?
The 619/710F1 catalogue lists da = 766 mm; Da = 905 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/710F1?
The listed values for 619/710F1 are grease: 500 rpm; oil: 600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/710F1?
The catalogue reference mass for 619/710F1 is 208 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.