Deep groove ball bearings
619/800F1 Deep Groove Ball Bearing Dimensions & Specifications
619/800F1 deep groove ball bearing: 800 mm bore (d), 1060 mm outside diameter (D), 115 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 800 mm |
|---|---|
| Outside diameter D | 1060 mm |
| Width B | 115 mm |
| Mass | 275 kg |
| Catalogue dynamic load Cr | 825 kN |
| Catalogue static load Cor | 2050 kN |
| Grease-lubricated speed grease | 430 rpm |
| Oil-lubricated speed oil | 500 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1013 mm |
|---|---|
| Abutment dimension da da | 860 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/800F1?
The 619/800F1 catalogue lists da = 860 mm; Da = 1013 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/800F1?
The listed values for 619/800F1 are grease: 430 rpm; oil: 500 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/800F1?
The catalogue reference mass for 619/800F1 is 275 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.