Deep groove ball bearings
619/850F1 Deep Groove Ball Bearing Dimensions & Specifications
619/850F1 deep groove ball bearing: 850 mm bore (d), 1120 mm outside diameter (D), 118 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 850 mm |
|---|---|
| Outside diameter D | 1120 mm |
| Width B | 118 mm |
| Mass | 310 kg |
| Catalogue dynamic load Cr | 832 kN |
| Catalogue static load Cor | 2160 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 480 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1094 mm |
|---|---|
| Abutment dimension da da | 876 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/850F1?
The 619/850F1 catalogue lists da = 876 mm; Da = 1094 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/850F1?
The listed values for 619/850F1 are grease: 400 rpm; oil: 480 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/850F1?
The catalogue reference mass for 619/850F1 is 310 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.