722 SERIES · SINGLE-ROW ANGULAR CONTACT BALL BEARING
7226ACM Single-Row Angular Contact Ball Bearing Dimensions & Specifications
7226ACM single-row angular contact ball bearing: 130 mm bore (d), 230 mm outside diameter (D), 40 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 130 mm |
|---|---|
| Outside diameter D | 230 mm |
| Width B | 40 mm |
| Mass | 7.26 kg |
| Catalogue dynamic load Cr | 155 kN |
| Catalogue static load Cor | 200 kN |
| Grease-lubricated speed | 1900 rpm |
| Oil-lubricated speed | 2800 rpm |
Mounting dimensions & additional parameters (10)
| Abutment dimension Da | 216 mm |
|---|---|
| Abutment dimension da | 144 mm |
| Minimum chamfer r12 | 3 mm |
| Minimum chamfer r34 | 1.1 mm |
| Factor X | 0.42 |
| Factor Y | 0.87 |
| Factor Y0 | 0.38 |
| Factor e | 0.68 |
| Maximum fillet ra | 2.5 mm |
| Load centre dimension a | 62.0 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 7226ACM?
The 7226ACM catalogue lists da min = 144 mm; Da max = 216 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 7226ACM?
The listed values for 7226ACM are grease: 1900 rpm; oil: 2800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 7226ACM?
The catalogue reference mass for 7226ACM is 7.26 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
How does 7226ACM angular contact ball bearing handle combined loads?
7226ACM (130 × 230 × 40 mm) carries combined radial and axial loads along its contact angle. Single-row angular contact bearings carry unidirectional axial load and are normally mounted in opposed pairs (DB/DF) or tandem (DT). Verify contact angle and matched preload or clearance against engineering drawings.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
DIRECT FACTORY SOURCING
Request a Quote for 7226ACM
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

