Bearing Suffix Decoder and Cross-Brand ISO Reference
Enter any industrial bearing designation to break down series anatomy, bore geometry (K vs K30 vs cylindrical), lubrication features, clearance groups, and ISO nominal cross-brand equivalents.
Interactive Industrial Bearing Designation Decoder
SKF · FAG · NSK · NTN · ZQMCross-Brand ISO Suffix Comparison Reference
Common nomenclature conventions across major international bearing manufacturers and ZQM Bearings.
| Feature Category | ZQM Bearings | SKF | FAG / Schaeffler | NSK | NTN |
|---|---|---|---|---|---|
| Lubrication Groove & Holes | W33 | W33 | S | E4 | D1 |
| 1:12 Tapered Bore | K | K | K | K | K |
| 1:30 Tapered Bore (240/241) | K30 | K30 | K30 | K30 | K30 |
| Radial Clearance Groups | C2 / CN / C3 / C4 | C2 / CN / C3 / C4 | C2 / CN / C3 / C4 | C2 / CN / C3 / C4 | C2 / CN / C3 / C4 |
| Heavy SRB Internal Design | CA / CC / MB (per model) | CA / CC / E | E1 / MB / M | EA / CAM / CD | EA / B / L1 |
| Reinforced CRB Design | EM / E (confirm cage) | ECM / ECP / ECJ | E1-M1 / E1-TVP2 | EM / ET | E / G1 |
| Four-Row Mill Variants | FC / FCD / FCDP (/YA) | 313xxx / 314xxx | 5xxxxx / Z-5xxxxx | RV / 4Rxxxx | 4Rxxxx |
Mandatory ISO Non-Interchangeability Disclaimer: This cross-reference table maps nominal ISO boundary series and published suffix conventions for engineering orientation only. Exact cage material, roller count, internal clearance, Fw diameter, and tolerance class vary by manufacturer and series—always confirm compatibility against equipment drawings before substitution.
Bearing Suffix & Cross-Reference FAQ
Avoiding common cross-brand procurement pitfalls.
Does W33 mean the exact same thing as NSK E4, FAG S, and NTN D1?
Yes in functional intent: all four suffixes denote an annular lubrication groove and lubrication holes in the outer ring of spherical roller bearings, allowing relubrication directly between roller rows. Always confirm hole count and housing alignment on custom large-bore orders.
Can I infer cage material automatically just from seeing E or CA in a suffix?
No. Single letters such as E indicate reinforced internal roller geometry across multiple brands, while cage material depends on the complete suffix string and manufacturer series specification. ZQM strictly verifies cage construction against catalog records and factory engineering drawings rather than guessing from partial suffixes.
Why do some QJF bearings (like 116756 / QJF1058MB) trigger a -0.5 mm OD alert?
Certain heavy industrial four-point contact ball bearings in the ZQM catalog (such as QJF1048X1MB at 359.5 mm, QJF1052X1MB at 399.5 mm, QJF1058MB at 419.5 mm, and QJF1060X3MB at 459.5 mm) have a special -0.5 mm outer diameter compared with standard integer QJ bearings so the outer ring floats radially in a dedicated housing.
How should I verify a four-row rolling mill cross-reference (SKF/FAG/NSK to ZQM FC/FCD)?
Never match four-row mill bearings on d × D × B alone. Always check the roller-set bore diameter Fw, ring separability (FC vs FCD vs FCDP), and lubrication slots against your roll-neck drawing before ordering.
Have a Multi-Line OEM or MRO Bearing BOM to Cross-Reference?
Send your SKF, FAG, NSK, NTN, or Timken part list to our engineering team for verified ZQM nominal cross-checks and quotation.

