23980 CA/W33 Spherical Roller Bearing 400 × 540 × 106 mm

23980 CA/W33 spherical roller bearing: 400 × 540 × 106 mm, machined brass (ca), dynamic rating Cr 1,890 kN, static rating Cor 4,250 kN, reference mass 69.1 kg. Verify shaft drawings and request bulk factory pricing from ZQM.

Request a Quote

23980 CA/W33 Spherical Roller Bearing Overview

Purpose-built for large 400 mm hollow shafts with tight radial envelope limits, 23980 CA/W33 trims outer diameter down to 540 mm and width to 106 mm, weighing only 69.1 kg. Despite its ultra-thin cross-section, it provides 1,890 kN dynamic capacity, 4,250 kN static capacity, and 530/630 rpm speed limits.

Envelope (d × D × B)400 × 540 × 106 mm
Dynamic / Static RatingCr 1,890 / C0r 4,250 kN
Limiting Speed (Grease / Oil)530 / 630 rpm
Reference Mass · Execution69.1 kg · Machined Brass (CA)

23980CA/W33 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 23980CA/W33
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)400 mm
Boundary Dimensions & WeightOutside diameter (D)540 mm
Boundary Dimensions & WeightWidth (B)106 mm
Boundary Dimensions & WeightReference mass (Weight)69.1 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)1890 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)4250 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)530 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)630 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)418 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)522 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)4 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)3 mm
Calculation FactorsCalculation factor (e)0.18
Calculation FactorsAxial load factor (static) (Y0)3.8
Calculation FactorsAxial load factor (Y1)3.9
Calculation FactorsAxial load factor (Y2)5.7

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Designation Breakdown & 400 mm Bore Selection

Key execution codes for 23980 CA/W33 and engineering comparison across 400 mm bore catalogue alternatives:

Attribute Code / Option Engineering Notes
CA / W33 Structure 23980 CA/W33 One-piece machined brass cage (CA), symmetrical rollers, annular outer-ring oil groove and 3 lube holes (W33)
Radial Clearance C0 (Normal) / C3 / C4 C3 recommended for heated journals or sleeve clamping; C4 reserved for vibrating-screen eccentrics
Bore Execution Cylindrical / Tapered (1:12 K) Straight bore standard; optional 1:12 tapered bore (K) mounts via adapter or withdrawal sleeves

On 400 mm journals, 23980 CA/W33 reference mass (69.1 kg) is approximately 35.8% of 24080 (193 kg)—a mass difference of 123.9 kg—making it the prime choice where 600–650 mm housings will not fit.

Catalogue Unit Envelope & Mass Ratings & Grease Limit
23980CA/W33 (Current) 400 × 540 × 106 mm · 69.1 kg Cr 1,890 kN · C0r 4,250 kN · 530 rpm
23080CA/W33 400 × 600 × 148 mm · 146 kg Cr 2,970 kN · C0r 5,900 kN · 480 rpm
24080CA/W33 400 × 600 × 200 mm · 193 kg Cr 3,600 kN · C0r 7,600 kN · 400 rpm
23180CA/W33 400 × 650 × 200 mm · 257 kg Cr 4,150 kN · C0r 7,900 kN · 380 rpm

Brand Cross-Reference & Interchangeability

Manufacturer designations sharing the 400 × 540 × 106 mm nominal ISO boundary envelope (full product catalog):

Manufacturer Reference Code Verification Scope
ZQM Bearings 23980 CA/W33 Machined brass CA cage & W33 lube groove per ISO 15 envelope
SKF 23980 CC/W33 Explorer series reference; confirm stamped steel vs brass cage
FAG / Schaeffler 23980-E1-XL-MB1 E1/X-life spherical series with MB1 brass cage
NSK 23980CAME4 EA / CAME4 high-capacity brass-cage execution
NTN / Timken 23980EMD1 / 23980EJW33 Heavy-duty industrial spherical series peer

Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (400 × 540 × 106 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.

Industrial Applications & Mounting Guidance (400 mm Shaft Class)

Primary machinery roles and field mounting practices matched to this 400 × 540 × 106 mm assembly:

Target Machinery Operating Duty Profile Mounting & Lubrication Practice
Large Rotary Kiln & Dryer Trunnion Hollow Shafts Thin-section support around 400 mm spindles with moderate radial forces Control housing ovality closely because thin-walled 540 mm outer rings conform to bore geometry
Heavy Cable Drum & Marine Winch Main Barrels Basic static load rating C0r of 4,250 kN at intermittent low rpm (actual shock and dynamic peak loads must be separately verified per cycle) Specify C0 or C3 depending on drum hub interference fit and ambient sea climate
Tunnel Boring & Cutterhead Secondary Supports Space-restricted large-bore spindles needing self-alignment Use 1:12 tapered K sleeve or heated cylindrical fit plus multi-point grease distribution

For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.

Pre-Order Engineering Checklist

Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 400 × 540 × 106 mm model:

Checkpoint Parameters to Confirm Engineering Purpose
1. Code & Clearance Specify 23980 CA/W33, C0/C3/C4 play, and 1:12 K bore Aligns mounted internal play with shaft interference and running ΔT
2. Shoulder & Fit Limits Verify da 418 mm, Da 522 mm, r1,2 min 4 mm, ra max 3 mm Prevents chamfer interference and inner-ring creep
3. Quantity & QC Scope Unit mass 69.1 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs Confirms pallet crating, MOQ lead time, and inspection records

Ready for drawing review, clearance matching, or factory bulk quotation on this 400 mm shaft unit?

Request Technical Quote

Frequently Asked Questions

What are the dimensions and weight of 23980 CA/W33?

It measures 400 mm bore × 540 mm outside diameter × 106 mm width with a reference mass of 69.1 kg.

How does the thin-section 239 series compare with 23080 and 24080?

At 69.1 kg and 540 mm OD, it saves 76.9 kg versus 23080 (600 mm OD) and achieves a higher 530 rpm grease limit, trading extreme radial load for compact packaging.

What shoulder and chamfer values govern housing machining?

Use shaft abutment da min >= 418 mm, housing shoulder Da max <= 522 mm, fillet radius ra max = 4 mm.

Why is housing roundness and clearance inspection vital on thin-wall 400 mm rings?

Thin-section 400 × 540 mm rings transmit seat distortion directly to raceway clearance, making precision bore grinding and C3 verification critical. Reach out to confirm custom clearance, export crating, and CMM/UT inspection reports.

Scroll to Top