NU2326EM Cylindrical Roller Bearing 130 × 280 × 93 mm

NU2326EM cylindrical roller bearing: 130 × 280 × 93 mm, machined brass (m), dynamic rating Cr 920 kN, static rating Cor 1,230 kN, reference mass 28.7 kg. Verify shaft drawings and request bulk factory pricing from ZQM.

Request a Quote

NU2326EM Cylindrical Roller Bearing Overview

Built with two outer-ring integral ribs and a flangeless separable inner ring on a straight cylindrical bore, NU2326EM (130 × 280 × 93 mm, 28.7 kg) serves as a heavy non-locating support allowing bidirectional axial shaft float. Reinforced E-series rollers and a machined brass M cage deliver Cr = 920 kN, Cor = 1,230 kN, Fw = 167 mm, and speeds up to 1,800 rpm grease / 2,200 rpm oil.

Envelope (d × D × B)130 × 280 × 93 mm
Dynamic / Static RatingCr 920 / C0r 1,230 kN
Limiting Speed (Grease / Oil)1,800 / 2,200 rpm
Reference Mass · Execution28.7 kg · Machined Brass (M)

NU2326EM Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: NU2326EM
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)130 mm
Boundary Dimensions & WeightOutside diameter (D)280 mm
Boundary Dimensions & WeightWidth (B)93 mm
Boundary Dimensions & WeightRoller set under-raceway diameter (Fw)167 mm
Boundary Dimensions & WeightReference mass (Weight)28.7 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)920 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)1230 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)1800 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)2200 rpm
Abutment & Fillet DimensionsShaft abutment reference diameter (db)149 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)258 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)4 mm
Abutment & Fillet DimensionsMinimum flange chamfer (r34)4 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)3 mm
Abutment & Fillet DimensionsMaximum flange fillet radius (rb)3 mm

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Designation Breakdown & 130 mm Bore Selection

Key execution codes for NU2326EM and engineering comparison across 130 mm bore catalogue alternatives:

Attribute Code / Option Engineering Notes
NJ / NU & EM Execution NU2326EM Outer ring 2 ribs, flangeless inner ring (pure non-locating axial float); reinforced E rollers; machined brass cage (M); straight cylindrical bore
Internal Clearance C0 (Normal) / C3 Select C3 radial clearance when heavy shaft interference fits or 2,200+ rpm heat reduce operating play
Under-Roller Envelope Fw = 167 mm Straight-bore inner raceway allows separable mounting; Ew and Db/da: Contact us for specifications

Sharing the 130 × 280 × 93 mm boundary with single-locating NJ2326EM, NU2326EM allows free axial float inside the bearing raceway; compared with lighter 22-series NU226EM (Cr 345 kN), radial capacity nearly triples to 920 kN.

Catalogue Unit Envelope & Mass Ratings & Grease Limit
NU2326EM (Current) 130 × 280 × 93 mm · 28.7 kg Cr 920 kN · C0r 1,230 kN · 1,800 rpm
NJ2326EM 130 × 280 × 93 mm · 28.9 kg Cr 920 kN · C0r 1,230 kN · 1,800 rpm
NJ326EM 130 × 280 × 58 mm · 19.5 kg Cr 615 kN · C0r 735 kN · 1,800 rpm
NU226EM 130 × 230 × 40 mm · 7.90 kg Cr 345 kN · C0r 425 kN · 2,200 rpm

Brand Cross-Reference & Interchangeability

Manufacturer designations sharing the 130 × 280 × 93 mm nominal ISO boundary envelope (full product catalog):

Manufacturer Reference Code Verification Scope
ZQM Bearings NU2326EM Machined brass cage cylindrical unit per ISO 15 boundary dimensions
SKF NU 2326 ECM Reinforced cylindrical design with machined brass cage
FAG / Schaeffler NU2326-E-XL-M1 X-life cylindrical series with M1 solid brass cage
NSK NU2326EM High-capacity cylindrical series with brass cage
NTN NU2326EG1 Machined brass cage industrial execution

Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (130 × 280 × 93 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.

Industrial Applications & Mounting Guidance (130 mm Shaft Class)

Primary machinery roles and field mounting practices matched to this 130 × 280 × 93 mm assembly:

Target Machinery Operating Duty Profile Mounting & Lubrication Practice
Floating Non-Locating Ends of Heavy Gearboxes Thermal shaft elongation under continuous high-torque operation Flangeless inner ring slides smoothly over rollers without inducing axial preload
Large Industrial Electric Motors & Generators High radial stator/belt loads at up to 2,200 rpm oil / 1,800 rpm grease Separable straight-bore inner ring simplifies rotor balancing and field replacement
Steel Rolling Mill & Mining Drive Pinions Heavy shock loads in 130 mm bore transmissions Machined brass M cage maintains roller alignment under vibration and misalignment transients

For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.

Pre-Order Engineering Checklist

Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 130 × 280 × 93 mm model:

Checkpoint Parameters to Confirm Engineering Purpose
1. Code & Clearance Specify NU2326EM, C0/C3/C4 play, and straight bore Aligns mounted internal play with shaft interference and running ΔT
2. Shoulder & Fit Limits Verify db 149 mm, Da 258 mm, ra 3 mm; Db/da: Contact us for specifications Prevents chamfer interference and inner-ring creep
3. Quantity & QC Scope Unit mass 28.7 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs Confirms pallet crating, MOQ lead time, and inspection records

Ready for drawing review, clearance matching, or factory bulk quotation on this 130 mm shaft unit?

Request Technical Quote

Frequently Asked Questions

What are the exact catalogue dimensions and mass of NU2326EM?

ZQM catalogue specs confirm 130 mm straight bore, 280 mm outside diameter, 93 mm width, under-roller diameter Fw = 167 mm, and 28.7 kg mass.

Why use NU2326EM on the non-locating bearing position?

Its flangeless inner ring permits bidirectional axial displacement relative to the housing, preventing thermal bind when paired with NJ2326EM or a locating spherical roller bearing. Contact us for specifications on unquoted Db, da, or Ew.

What mounting shoulder and fillet limits apply to NU2326EM?

Published mounting dimensions are db min = 149 mm, Da max = 258 mm, minimum chamfer r1,2/r3,4 = 4 mm, and maximum fillet ra/rb = 3 mm; Contact us for specifications on unquoted Db and da dimensions.

Which clearance grades and inspection sheets can ZQM supply for NU2326EM?

Standard CN, C3, and C4 radial internal clearances are supplied based on shaft interference fit and temperature rise; contact ZQM for MOQ, export lead time, and CMM/hardness/UT quality records.

Scroll to Top