NU2326EM Cylindrical Roller Bearing Overview
Built with two outer-ring integral ribs and a flangeless separable inner ring on a straight cylindrical bore, NU2326EM (130 × 280 × 93 mm, 28.7 kg) serves as a heavy non-locating support allowing bidirectional axial shaft float. Reinforced E-series rollers and a machined brass M cage deliver Cr = 920 kN, Cor = 1,230 kN, Fw = 167 mm, and speeds up to 1,800 rpm grease / 2,200 rpm oil.
NU2326EM Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 130 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 280 mm |
| Boundary Dimensions & Weight | Width (B) | 93 mm |
| Boundary Dimensions & Weight | Roller set under-raceway diameter (Fw) | 167 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 28.7 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 920 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 1230 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 1800 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 2200 rpm |
| Abutment & Fillet Dimensions | Shaft abutment reference diameter (db) | 149 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 258 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 4 mm |
| Abutment & Fillet Dimensions | Minimum flange chamfer (r34) | 4 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 3 mm |
| Abutment & Fillet Dimensions | Maximum flange fillet radius (rb) | 3 mm |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Designation Breakdown & 130 mm Bore Selection
Key execution codes for NU2326EM and engineering comparison across 130 mm bore catalogue alternatives:
| Attribute | Code / Option | Engineering Notes |
|---|---|---|
| NJ / NU & EM Execution | NU2326EM |
Outer ring 2 ribs, flangeless inner ring (pure non-locating axial float); reinforced E rollers; machined brass cage (M); straight cylindrical bore |
| Internal Clearance | C0 (Normal) / C3 | Select C3 radial clearance when heavy shaft interference fits or 2,200+ rpm heat reduce operating play |
| Under-Roller Envelope | Fw = 167 mm | Straight-bore inner raceway allows separable mounting; Ew and Db/da: Contact us for specifications |
Sharing the 130 × 280 × 93 mm boundary with single-locating NJ2326EM, NU2326EM allows free axial float inside the bearing raceway; compared with lighter 22-series NU226EM (Cr 345 kN), radial capacity nearly triples to 920 kN.
| Catalogue Unit | Envelope & Mass | Ratings & Grease Limit |
|---|---|---|
| NU2326EM (Current) | 130 × 280 × 93 mm · 28.7 kg | Cr 920 kN · C0r 1,230 kN · 1,800 rpm |
| NJ2326EM | 130 × 280 × 93 mm · 28.9 kg | Cr 920 kN · C0r 1,230 kN · 1,800 rpm |
| NJ326EM | 130 × 280 × 58 mm · 19.5 kg | Cr 615 kN · C0r 735 kN · 1,800 rpm |
| NU226EM | 130 × 230 × 40 mm · 7.90 kg | Cr 345 kN · C0r 425 kN · 2,200 rpm |
Brand Cross-Reference & Interchangeability
Manufacturer designations sharing the 130 × 280 × 93 mm nominal ISO boundary envelope (full product catalog):
| Manufacturer | Reference Code | Verification Scope |
|---|---|---|
| ZQM Bearings | NU2326EM |
Machined brass cage cylindrical unit per ISO 15 boundary dimensions |
| SKF | NU 2326 ECM | Reinforced cylindrical design with machined brass cage |
| FAG / Schaeffler | NU2326-E-XL-M1 | X-life cylindrical series with M1 solid brass cage |
| NSK | NU2326EM | High-capacity cylindrical series with brass cage |
| NTN | NU2326EG1 | Machined brass cage industrial execution |
Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (130 × 280 × 93 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.
Industrial Applications & Mounting Guidance (130 mm Shaft Class)
Primary machinery roles and field mounting practices matched to this 130 × 280 × 93 mm assembly:
| Target Machinery | Operating Duty Profile | Mounting & Lubrication Practice |
|---|---|---|
| Floating Non-Locating Ends of Heavy Gearboxes | Thermal shaft elongation under continuous high-torque operation | Flangeless inner ring slides smoothly over rollers without inducing axial preload |
| Large Industrial Electric Motors & Generators | High radial stator/belt loads at up to 2,200 rpm oil / 1,800 rpm grease | Separable straight-bore inner ring simplifies rotor balancing and field replacement |
| Steel Rolling Mill & Mining Drive Pinions | Heavy shock loads in 130 mm bore transmissions | Machined brass M cage maintains roller alignment under vibration and misalignment transients |
For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.
Pre-Order Engineering Checklist
Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 130 × 280 × 93 mm model:
| Checkpoint | Parameters to Confirm | Engineering Purpose |
|---|---|---|
| 1. Code & Clearance | Specify NU2326EM, C0/C3/C4 play, and straight bore |
Aligns mounted internal play with shaft interference and running ΔT |
| 2. Shoulder & Fit Limits | Verify db 149 mm, Da 258 mm, ra 3 mm; Db/da: Contact us for specifications | Prevents chamfer interference and inner-ring creep |
| 3. Quantity & QC Scope | Unit mass 28.7 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs | Confirms pallet crating, MOQ lead time, and inspection records |
Frequently Asked Questions
What are the exact catalogue dimensions and mass of NU2326EM?
ZQM catalogue specs confirm 130 mm straight bore, 280 mm outside diameter, 93 mm width, under-roller diameter Fw = 167 mm, and 28.7 kg mass.
Why use NU2326EM on the non-locating bearing position?
Its flangeless inner ring permits bidirectional axial displacement relative to the housing, preventing thermal bind when paired with NJ2326EM or a locating spherical roller bearing. Contact us for specifications on unquoted Db, da, or Ew.
What mounting shoulder and fillet limits apply to NU2326EM?
Published mounting dimensions are db min = 149 mm, Da max = 258 mm, minimum chamfer r1,2/r3,4 = 4 mm, and maximum fillet ra/rb = 3 mm; Contact us for specifications on unquoted Db and da dimensions.
Which clearance grades and inspection sheets can ZQM supply for NU2326EM?
Standard CN, C3, and C4 radial internal clearances are supplied based on shaft interference fit and temperature rise; contact ZQM for MOQ, export lead time, and CMM/hardness/UT quality records.










