23252 CA/W33 Cone Crusher & Eccentric Shaft Bearing Overview
Sized at 260 × 480 × 174 mm (137 kg), the 23252 CA/W33 spherical roller bearing is widely selected for secondary cone crushers, heavy vibrating grizzly feeders, and aggregate jaw pitman drives where cyclic shock impacts dominate bearing life. Per ZQM Bearings’ 259-page general catalogue, it carries Cr = 2,740 kN and C0r = 4,550 kN with ISO 281 axial factors e = 0.37, Y1 = 1.8, Y2 = 2.7, and Y0 = 1.8.
Its wide 232 cross-section resists raceway brinelling during quarry tramp-iron overload events while compensating for crusher frame deflection.
23252CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 260 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 480 mm |
| Boundary Dimensions & Weight | Width (B) | 174 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 137 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 2740 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 4550 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 560 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 750 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 282 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 458 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 5 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 4 mm |
| Calculation Factors | Calculation factor (e) | 0.37 |
| Calculation Factors | Axial load factor (static) (Y0) | 1.8 |
| Calculation Factors | Axial load factor (Y1) | 1.8 |
| Calculation Factors | Axial load factor (Y2) | 2.7 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Quarry & Crushing Engineering Highlights
- Shock-Resistant Eccentric Support: High static capacity (4,550 kN) preserves safety factor s0 under sudden granite or iron-ore crushing spikes.
- W33 Outer-Ring Oil Distribution: Three radial holes feed EP grease or splash oil directly into the central roller zone up to 560 r/min (grease) or 750 r/min (oil).
- Straight Bore or 1:12 Sleeve Option: Supplied cylindrical bore as standard; tapered-bore H3252 / AHX3252 sleeve conversions use a 1:12 taper (suffix K).
Primary Quarry & Aggregate Duty Stations
Deployed on secondary cone crusher eccentric sleeves, jaw crusher main pitman shafts, and heavy impactor rotors. Explore full crushing setups in our Mining and Crushing Hub or verify shock-load life in the ISO 281 Life Calculator.
Nominal ISO Cross-Reference (23252 Series)
| Manufacturer | Nominal Designation | Envelope |
|---|---|---|
| ZQM Bearings | 23252 CA/W33 | 260 × 480 × 174 mm |
| SKF | 23252 CAC/W33 / CC/W33 | 260 × 480 × 174 mm |
| FAG / Schaeffler | 23252-B-MB / E1-XL | 260 × 480 × 174 mm |
| NSK / NTN | 23252 CAME4 / 23252 B D1 | 260 × 480 × 174 mm |
Nominal Boundary Disclaimer: Cross-brand numbers indicate ISO 15 boundary equivalence only and do not guarantee direct interchangeability; confirm clearance, cage construction, and housing drawings prior to replacement.
Crusher Mounting Abutments & Supply Confirmation
Confirm shaft shoulder da min = 282 mm, housing shoulder Da max = 458 mm, and max fillet ra max = 4 mm. Manufactured in Wafangdian (ISO 9001 & ISO 14001) with Ningbo export engineering support. Request crusher bearing quotation and lead time.
23252 CA/W33 Quarry Engineering FAQ
Why is 23252 CA/W33 preferred for cone crusher eccentric shafts?
Its 260 × 480 × 174 mm wide roller envelope provides 2,740 kN dynamic and 4,550 kN static capacity, absorbing peak quarry impact forces without premature spalling.
Should crusher installations run C3 or C4 clearance on 23252?
Most heavy interference-fit jaw and cone crushers specify C3 clearance, while high-vibration screens and hot-running pitman shafts step up to C4 to protect operating clearance.
Which adapter sleeve fits a tapered 23252 K bearing?
Tapered 23252 K uses a 1:12 bore matched to H3252 adapter or AHX3252 withdrawal sleeves—never 1:30 K30 sleeves.
At what RPM should 23252 CA/W33 switch from grease to oil lubrication?
Reference grease speed is 560 r/min and oil speed is 750 r/min; continuous duty above ~450 r/min in warm quarry climates typically benefits from circulating oil cooling.
How do I quote replacement 23252 bearings for an existing quarry fleet?
Share your existing stamped suffix, C3/C4 clearance requirement, order quantity, and destination port via our Contact page.






