23244 CA/W33 Spherical Roller Bearing 220 × 400 × 144 mm

Heavy-duty 23244 CA/W33 spherical roller bearing (220 × 400 × 144 mm, Cr 2,020 kN, C0r 3,400 kN, 80.4 kg) with straight cylindrical bore and W33 outer-ring lubrication groove and oil holes. Supplied directly by ZQM Bearings for trial samples, mixed-SKU maintenance orders, and scheduled OEM/MRO production.

Request a Quote

23244 CA/W33 Spherical Roller Bearing Overview

Built inside the wide 232 dimension series at 220 × 400 × 144 mm (reference mass 80.4 kg), the 23244 CA/W33 (23244CA/W33) double-row spherical roller bearing accommodates shaft deflection and combined radial-axial shock loading in primary crushers, heavy reducers, and mill drives. Per ZQM Bearings’ 259-page general catalogue and online database, it provides a basic dynamic load rating Cr of 2,020 kN, basic static load rating C0r of 3,400 kN, and limiting speeds of 670 rpm (grease) / 900 rpm (oil).

Dimensions (d × D × B)220 × 400 × 144 mm
Dynamic / Static LoadCr 2,020 / C0r 3,400 kN
Limiting Speed (Grease / Oil)670 / 900 rpm
Reference Mass · Bore80.4 kg · Cylindrical (1:12 K opt.)

23244CA/W33 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 23244CA/W33
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)220 mm
Boundary Dimensions & WeightOutside diameter (D)400 mm
Boundary Dimensions & WeightWidth (B)144 mm
Boundary Dimensions & WeightReference mass (Weight)80.4 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)2020 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)3400 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)670 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)900 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)238 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)382 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)4 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)3 mm
Calculation FactorsCalculation factor (e)0.35
Calculation FactorsAxial load factor (static) (Y0)1.9
Calculation FactorsAxial load factor (Y1)1.9
Calculation FactorsAxial load factor (Y2)2.9

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

23244 CA/W33 Designation & Structural Features

The designation 23244 CA/W33 identifies a 232-series heavy wide-section spherical roller bearing for a 220 mm shaft (bore code 44 × 5 = 220 mm). In ZQM’s standard catalogue execution, CA denotes a one-piece machined solid brass cage paired with symmetrical rollers and integral inner-ring retaining flanges, while W33 denotes a circumferential lubrication groove and three equally spaced oil holes in the outer ring for direct relubrication. Standard stock is supplied with a straight cylindrical bore; where sleeve mounting is required, the 232 series uses a 1:12 tapered bore (K) rather than the 1:30 (K30) taper used in 240/241 series—see our K vs. K30 tapered bore & sleeve guide and C3 radial clearance selection guide.

Catalogue Model (220 mm Bore) Dimensions & Mass Load Ratings & Grease Speed
23244CA/W33 (Selected) 220 × 400 × 144 mm · 80.4 kg Cr 2,020 kN · C0r 3,400 kN · 670 rpm
23044CA/W33 220 × 340 × 90 mm · 29.7 kg Cr 1,090 kN · C0r 1,980 kN · 950 rpm
23144CA/W33 220 × 370 × 120 mm · 53.0 kg Cr 1,570 kN · C0r 2,710 kN · 710 rpm
24144CA/W33 220 × 370 × 150 mm · 66.7 kg Cr 1,800 kN · C0r 3,200 kN · 710 rpm
22244CA/W33 220 × 400 × 108 mm · 59.0 kg Cr 1,570 kN · C0r 2,430 kN · 850 rpm

Brand Cross-Reference & Equivalent Designations

The table below lists major bearing manufacturer designations sharing the same 220 × 400 × 144 mm ISO 15 nominal boundary dimensions as 23244 CA/W33 (for methodology, see our ISO bearing cross-reference guide):

Manufacturer ISO Nominal Reference Verification Scope Before Replacement
ZQM Bearings 23244 CA/W33 / 23244 CA/W33 C3 ZQM factory catalogue specification; confirm clearance group (CN/C3/C4) and bore type
SKF 23244 CC/W33 / 23244 CCK/W33 Standard / Explorer geometry; confirm stamped steel vs. brass cage and C3 suffix
FAG / Schaeffler 23244-B-MB / 23244-BEA-XL-MB1 Machined brass cage 232 series; verify lubrication groove (S) and clearance suffix
NSK 23244CAME4 / 23244CAMKE4 CAME4 / E4 outer-ring groove and holes; verify cylindrical vs. 1:12 K tapered bore
NTN 23244EMD1 / 23244EMKD1 D1 lubrication groove and holes; confirm internal clearance and sleeve accessory

ISO Nominal Boundary Disclaimer: Equivalent designations indicate matching ISO 15 nominal boundary dimensions (220 × 400 × 144 mm) only and do not guarantee direct functional interchangeability. Always verify internal cage execution, radial clearance, chamfer geometry, and duty-cycle load ratings against the OEM drawing before ordering.

Industrial Applications & Operating Conditions

With 2,020 kN dynamic capacity and calculation factors e = 0.35, Y1 = 1.9, Y2 = 2.9, and Y0 = 1.9, 23244 CA/W33 is specified across demanding mining and crushing equipment as well as steel, cement, and pulp installations (browse all industrial bearing applications):

Equipment Position Dominant Operating Loads Engineering & Lubrication Notes
Jaw & Gyratory Crusher Main / Eccentric Shafts Severe shock radial peaks, housing flexure, abrasive ore dust Self-aligning spherical raceway compensates shaft bending; specify C3/C4 clearance for heavy press fits
Heavy Mining & Cement Mill Gearboxes / Head Pulleys Continuous high torque at low-to-medium shaft speeds 400 mm OD and 144 mm width maximize roller load zone compared with narrower 22244 or 23044 units
Steel Rolling Mill Auxiliary Drives & Caster Roll Supports Combined radial-axial loads, scale contamination, thermal cycling Feed EP grease or circulating oil directly through the W33 outer-ring groove and three oil holes
Pulp Refiners & Heavy Paper Mill Press Rolls Sustained line pressure, moisture ingress, long maintenance intervals Confirm shaft shoulder da min 238 mm and housing abutment Da max 382 mm on assembly drawings

Ordering 23244 CA/W33 & Pre-Order Checklist

ZQM Bearings coordinates manufacturing from our Wafangdian production base with export handling in Ningbo and warehousing in Shanghai—supporting single-piece trial validation, mixed-SKU MRO shipments, and recurring OEM supply. Confirm three items before requesting your formal quotation:

Checklist Item Details to Confirm Why It Matters
1. Complete Ordering Code Specify 23244 CA/W33, clearance (CN/C3/C4), cylindrical vs. 1:12 tapered bore (K), and cage confirmation Prevents mismatch with adapter sleeves (e.g., H2344 / OH 2344 H for 23244 K—not the shorter H3144 used on 23144 K) or thermal clearance targets
2. Housing & Shaft Abutment Check da min 238 mm, Da max 382 mm, r1,2 min 4 mm, and ra max 3 mm against drawing Avoids fillet corner interference and inner-ring creep under heavy radial shock
3. Batch Quantity & Packing Unit mass 80.4 kg; state quantity, destination port, Incoterms (EXW/FOB/CIF), and inspection scope Confirms export wooden-case crating, lead time, and dimensional/hardness inspection documentation

Need 23244 CA/W33 C3 availability, 1:12 tapered K sleeve matching, or factory lead times?

Request Technical Quote

Frequently Asked Questions (FAQ)

What are the exact dimensions, weight, and load ratings of 23244 CA/W33?

Per ZQM Bearings’ online catalogue database, 23244 CA/W33 measures 220 mm bore × 400 mm outside diameter × 144 mm width with a reference mass of 80.4 kg. Its basic dynamic load rating is Cr = 2,020 kN, basic static load rating is C0r = 3,400 kN, and limiting speeds are 670 rpm (grease) and 900 rpm (oil).

How does 23244 CA/W33 compare with 23144 CA/W33 and 24144 CA/W33 on a 220 mm shaft?

All three fit a 220 mm bore, but 23244 CA/W33 uses a larger 400 mm outside diameter (144 mm width) to reach the highest dynamic load rating at 2,020 kN, compared with 1,570 kN for 23144 CA/W33 (370 × 120 mm, 53.0 kg) and 1,800 kN for 24144 CA/W33 (370 × 150 mm, 66.7 kg). Choose 23244 when 400 mm housing radial space is available for maximum roller capacity.

Does the tapered-bore version of 23244 CA/W33 use a 1:12 (K) or 1:30 (K30) taper?

Standard 23244 CA/W33 has a straight cylindrical bore. When a tapered bore is ordered in the 232 series (23244 CAK/W33), it uses a 1:12 taper (K); the 1:30 taper (K30) is reserved for wide 240 and 241 series bearings such as 24144 CAK30/W33.

How should radial clearance and post-mount feeler checks be handled for 23244 CA/W33?

Select CN, C3, or C4 radial internal clearance based on shaft/housing press-fit interference and expected shaft-to-housing temperature differential. On radial spherical roller assemblies, post-mount feeler gauge readings verify mounted residual radial clearance—which must be distinguished from final hot operating clearance under thermal equilibrium.

What details should I provide to cross-check an SKF, FAG, or NSK 23244 replacement?

Share the full stamped designation from your existing bearing (including cage code, clearance group, and cylindrical vs. K tapered bore) along with equipment duty and order quantity. ZQM’s engineering team will cross-check abutment dimensions (da 238 mm, Da 382 mm, ra max 3 mm) and supply specifications before quoting.

Scroll to Top