23268 CA/W33 SAG/Ball Mill Trunnion & Mine Hoist Bearing Overview
At nearly 300 kg (295 kg) and 340 × 620 × 224 mm, the flagship 23268 CA/W33 mega-bore spherical roller bearing carries extreme radial deadweight inside primary SAG/ball mill trunnion supports, deep-shaft mine hoist sheaves, and giant gyratory crusher shafts. Catalog-verified capacity climbs to Cr = 4,400 kN and C0r = 7,800 kN (e = 0.36, Y1 = 1.9, Y2 = 2.8, Y0 = 1.8).
Generous r1,2 min = 6 mm ring chamfers reduce shaft-shoulder stress concentrations on massive forged mill and hoist axles.
23268CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 340 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 620 mm |
| Boundary Dimensions & Weight | Width (B) | 224 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 295 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 4400 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 7800 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 400 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 530 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 368 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 592 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 6 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 5 mm |
| Calculation Factors | Calculation factor (e) | 0.36 |
| Calculation Factors | Axial load factor (static) (Y0) | 1.8 |
| Calculation Factors | Axial load factor (Y1) | 1.9 |
| Calculation Factors | Axial load factor (Y2) | 2.8 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Mega-Bore Trunnion & Hoist Safety Engineering
- Multi-Hundred-Ton Static Safety (7,800 kN): Engineered for deep-mine hoist braking peaks and loaded ball-mill start-up cycles.
- 6 mm Heavy Chamfer & Stress Relief: Matches forged 340 mm shafts with ra max = 5 mm fillet radii to resist bending fatigue.
- Oil-Injection Hydraulic Maintenance: Straight 340 mm bore standard; tapered K versions (1:12) support oil-injection dismounting via OH3268H / AH3268G sleeves.
Flagship Heavy Mining & Hoisting Installations
Specified on primary ball/SAG mill pinions and trunnions, underground mine hoist head-sheaves, and marine rudder-carrier assemblies. See complete heavy mining setups in our Mining Machinery Hub and verify hoist safety factor s0 with our ISO 281 Life Calculator.
Nominal ISO Cross-Reference (23268 Series)
| Manufacturer | Nominal Designation | Boundary Dimensions |
|---|---|---|
| ZQM Bearings | 23268 CA/W33 | 340 × 620 × 224 mm |
| SKF | 23268 CA/W33 / CAK/W33 | 340 × 620 × 224 mm |
| FAG / Schaeffler | 23268-B-MB / E1-XL | 340 × 620 × 224 mm |
| NSK / NTN | 23268 CAME4 / 23268 B D1 | 340 × 620 × 224 mm |
ISO Nominal Disclaimer: Brand references indicate nominal 340 × 620 × 224 mm ISO envelope parity only; always verify ultrasonic/dimensional inspection criteria and clearance drawings for critical mine hoists.
Trunnion Abutments & Heavy-Lift Export Delivery
Verify shaft shoulder da min = 368 mm, housing shoulder Da max = 592 mm, max fillet ra max = 5 mm, and speeds of 400 r/min (grease) / 530 r/min (oil). Built at our ISO 9001/14001 Wafangdian heavy-ring plant with reinforced export crating via Shanghai. Request 23268 factory quotation and inspection plan.
23268 CA/W33 Mega-Bore Trunnion & Hoist FAQ
What makes 23268 CA/W33 suitable for deep-shaft mine hoists and ball mills?
Its 340 × 620 × 224 mm section delivers 4,400 kN dynamic and 7,800 kN static capacity, providing high safety factor s0 during emergency hoist braking and mill startup.
How should a 295 kg 23268 bearing be heated or mounted safely?
Use controlled induction heating (strictly ≤ 110–120 °C, never open flame) for cylindrical bores, or hydraulic drive-up with feeler verification for 1:12 K tapered bores.
What shaft shoulder fillet radius is required for 23268 CA/W33?
Keep shaft and housing fillet radii at or below ra max = 5 mm (matching the 6 mm minimum bearing chamfer) with da min = 368 mm and Da max = 592 mm.
Can ZQM agree on dimensional and ultrasonic inspection protocols before manufacture?
Yes. State your required dimensional, hardness, or ultrasonic inspection documents with your inquiry so protocols are confirmed in writing before production.
How do mining EPC contractors quote 23268 CA/W33?
Submit quantity, cylindrical vs K bore, C3/C4 clearance, required inspection documents, and destination port via our Contact page.






