230 SERIES · SPHERICAL ROLLER BEARING

230/900X2CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

230/900X2CAF3/W33 spherical roller bearing: 900 mm bore (d), 1280 mm outside diameter (D), 305 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 900 mmD 1280 mmB 305 mmCr 10300 kNMass 1250 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 900D 1280B 305

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d900 mm
Outside diameter D1280 mm
Width B305 mm
Mass1250 kg
Catalogue dynamic load Cr10300 kN
Catalogue static load Cor24800 kN
Grease-lubricated speed160 rpm
Oil-lubricated speed200 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1244 mm
Abutment dimension da936 mm
Minimum chamfer r127.5 mm
Factor Y03.2
Factor Y13.3
Factor Y24.9
Factor e0.2
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 230/900X2CAF3/W33?

The 230/900X2CAF3/W33 catalogue lists da min = 936 mm; Da max = 1244 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 230/900X2CAF3/W33?

The listed values for 230/900X2CAF3/W33 are grease: 160 rpm; oil: 200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 230/900X2CAF3/W33?

The catalogue reference mass for 230/900X2CAF3/W33 is 1250 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 900 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/900CAF3/W33Spherical Roller Bearing900 × 1090 × 190 mm
249/900CAF1D/W33Spherical Roller Bearing900 × 1180 × 400 mm
249/900CAF3/W33Spherical Roller Bearing900 × 1180 × 280 mm
239/900CAF3/W33Spherical Roller Bearing900 × 1180 × 206 mm
240/900CAF3/W33Spherical Roller Bearing900 × 1280 × 375 mm
231/900CAF3/W33Spherical Roller Bearing900 × 1420 × 412 mm

Compare alternative series sharing the same 900 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 230/900X2CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top