381 SERIES · FOUR-ROW TAPERED ROLLER BEARING

381096 Four-Row Tapered Roller Bearing Dimensions & Specifications

381096 four-row tapered roller bearing: 480 mm bore (d), 700 mm outside diameter (D), 420 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 480 mmD 700 mmT 420 mmMass 582 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 480D 700T 420

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d480 mm
Outside diameter D700 mm
Overall width T420 mm
Mass582 kg
Mounting dimensions & additional parameters (1)
Catalogue design code design1

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of 381096?

The catalogue reference mass for 381096 is 582 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 381096?

In the ZQM General Catalogue, 381096 has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on 381096 four-row tapered roller bearing?

381096 (480 × 700 × 420 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Other Bearing Series with 480 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
23896CAF3/W33Spherical Roller Bearing480 × 600 × 90 mm

Compare alternative series sharing the same 480 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 381096

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top