381 SERIES · FOUR-ROW TAPERED ROLLER BEARING

381176/HC Four-Row Tapered Roller Bearing Dimensions & Specifications

381176/HC four-row tapered roller bearing: 380 mm bore (d), 620 mm outside diameter (D), 420 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 380 mmD 620 mmT 420 mmMass 485 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 380D 620T 420

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d380 mm
Outside diameter D620 mm
Overall width T420 mm
Mass485 kg
Mounting dimensions & additional parameters (1)
Catalogue design code design1

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of 381176/HC?

The catalogue reference mass for 381176/HC is 485 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 381176/HC?

In the ZQM General Catalogue, 381176/HC has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on 381176/HC four-row tapered roller bearing?

381176/HC (380 × 620 × 420 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 381176/HC

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top