530 SERIES · FOUR-ROW TAPERED ROLLER BEARING

530TQO750-2 Four-Row Tapered Roller Bearing Dimensions & Specifications

530TQO750-2 four-row tapered roller bearing: 530 mm bore (d), 750 mm outside diameter (D), 550 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 530 mmD 750 mmT 550 mmMass 788 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 530D 750T 550

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d530 mm
Outside diameter D750 mm
Overall width T550 mm
Mass788 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y02.0
Factor Y12
Factor Y23
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of 530TQO750-2?

The catalogue reference mass for 530TQO750-2 is 788 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 530TQO750-2?

In the ZQM General Catalogue, 530TQO750-2 has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on 530TQO750-2 four-row tapered roller bearing?

530TQO750-2 (530 × 750 × 550 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Other Bearing Series with 530 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/530CAF3/W33Spherical Roller Bearing530 × 650 × 118 mm
618/530F1Deep Groove Ball Bearing530 × 650 × 56 mm

Compare alternative series sharing the same 530 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 530TQO750-2

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top