558 SERIES · FOUR-ROW TAPERED ROLLER BEARING

558TQO965A-1 Four-Row Tapered Roller Bearing Dimensions & Specifications

558TQO965A-1 four-row tapered roller bearing: 558.75 mm bore (d), 965.3 mm outside diameter (D), 495.3 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 558.75 mmD 965.3 mmT 495.3 mmMass 1580 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 558.75D 965.3T 495.3

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d558.75 mm
Outside diameter D965.3 mm
Overall width T495.3 mm
Mass1580 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of 558TQO965A-1?

The catalogue reference mass for 558TQO965A-1 is 1580 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 558TQO965A-1?

In the ZQM General Catalogue, 558TQO965A-1 has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on 558TQO965A-1 four-row tapered roller bearing?

558TQO965A-1 (558.75 × 965.3 × 495.3 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 558TQO965A-1

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top