560 SERIES · FOUR-ROW TAPERED ROLLER BEARING
560TQO920-2 Four-Row Tapered Roller Bearing Dimensions & Specifications
560TQO920-2 four-row tapered roller bearing: 560 mm bore (d), 920 mm outside diameter (D), 618 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 560 mm |
|---|---|
| Outside diameter D | 920 mm |
| Overall width T | 618 mm |
| Mass | 1670 kg |
Mounting dimensions & additional parameters (6)
| Catalogue design code design | 1 |
|---|---|
| Factor K | 1.46 |
| Factor Y0 | 1.7 |
| Factor Y1 | 1.7 |
| Factor Y2 | 2.5 |
| Factor e | 0.4 |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
What is the reference mass of 560TQO920-2?
The catalogue reference mass for 560TQO920-2 is 1670 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of 560TQO920-2?
In the ZQM General Catalogue, 560TQO920-2 has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
How is internal clearance controlled on 560TQO920-2 four-row tapered roller bearing?
560TQO920-2 (560 × 920 × 618 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 238/560CAF3/W33 | Spherical Roller Bearing | 560 × 680 × 90 mm |
| 618/560F1 | Deep Groove Ball Bearing | 560 × 680 × 56 mm |
Compare alternative series sharing the same 560 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for 560TQO920-2
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

