Deep groove ball bearings
60/1000F1 Deep Groove Ball Bearing Dimensions & Specifications
60/1000F1 deep groove ball bearing: 1000 mm bore (d), 1420 mm outside diameter (D), 185 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1000 mm |
|---|---|
| Outside diameter D | 1420 mm |
| Width B | 185 mm |
| Mass | 930 kg |
| Catalogue dynamic load Cr | 1350 kN |
| Catalogue static load Cor | 3900 kN |
| Grease-lubricated speed grease | 280 rpm |
| Oil-lubricated speed oil | 340 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1387 mm |
|---|---|
| Abutment dimension da da | 1033 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/1000F1?
The 60/1000F1 catalogue lists da = 1033 mm; Da = 1387 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/1000F1?
The listed values for 60/1000F1 are grease: 280 rpm; oil: 340 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/1000F1?
The catalogue reference mass for 60/1000F1 is 930 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.