Deep groove ball bearings
60/1120F1 Deep Groove Ball Bearing Dimensions & Specifications
60/1120F1 deep groove ball bearing: 1120 mm bore (d), 1580 mm outside diameter (D), 200 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 1120 mm |
|---|---|
| Outside diameter D | 1580 mm |
| Width B | 200 mm |
| Mass | 1250 kg |
| Catalogue dynamic load Cr | 1460 kN |
| Catalogue static load Cor | 4400 kN |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1540 mm |
|---|---|
| Abutment dimension da da | 1160 mm |
| Minimum chamfer r12 r12 | 9.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 8 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/1120F1?
The 60/1120F1 catalogue lists da = 1160 mm; Da = 1540 mm; ra ≤ 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 60/1120F1?
The catalogue reference mass for 60/1120F1 is 1250 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.