Deep groove ball bearings
60/850F1 Deep Groove Ball Bearing Dimensions & Specifications
60/850F1 deep groove ball bearing: 850 mm bore (d), 1220 mm outside diameter (D), 165 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 850 mm |
|---|---|
| Outside diameter D | 1220 mm |
| Width B | 165 mm |
| Mass | 630 kg |
| Catalogue dynamic load Cr | 1120 kN |
| Catalogue static load Cor | 2900 kN |
| Grease-lubricated speed grease | 360 rpm |
| Oil-lubricated speed oil | 430 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1187 mm |
|---|---|
| Abutment dimension da da | 883 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/850F1?
The 60/850F1 catalogue lists da = 883 mm; Da = 1187 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/850F1?
The listed values for 60/850F1 are grease: 360 rpm; oil: 430 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/850F1?
The catalogue reference mass for 60/850F1 is 630 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.