Deep groove ball bearings
60/950F1 Deep Groove Ball Bearing Dimensions & Specifications
60/950F1 deep groove ball bearing: 950 mm bore (d), 1360 mm outside diameter (D), 180 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 950 mm |
|---|---|
| Outside diameter D | 1360 mm |
| Width B | 180 mm |
| Mass | 860 kg |
| Catalogue dynamic load Cr | 1170 kN |
| Catalogue static load Cor | 3250 kN |
| Grease-lubricated speed grease | 320 rpm |
| Oil-lubricated speed oil | 380 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1327 mm |
|---|---|
| Abutment dimension da da | 983 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/950F1?
The 60/950F1 catalogue lists da = 983 mm; Da = 1327 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/950F1?
The listed values for 60/950F1 are grease: 320 rpm; oil: 380 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/950F1?
The catalogue reference mass for 60/950F1 is 860 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.