Deep groove ball bearings
60/800F1 Deep Groove Ball Bearing Dimensions & Specifications
60/800F1 deep groove ball bearing: 800 mm bore (d), 1150 mm outside diameter (D), 155 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 800 mm |
|---|---|
| Outside diameter D | 1150 mm |
| Width B | 155 mm |
| Mass | 540 kg |
| Catalogue dynamic load Cr | 1010 kN |
| Catalogue static load Cor | 2550 kN |
| Grease-lubricated speed grease | 400 rpm |
| Oil-lubricated speed oil | 480 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1054 mm |
|---|---|
| Abutment dimension da da | 826 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/800F1?
The 60/800F1 catalogue lists da = 826 mm; Da = 1054 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/800F1?
The listed values for 60/800F1 are grease: 400 rpm; oil: 480 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/800F1?
The catalogue reference mass for 60/800F1 is 540 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.