Deep groove ball bearings
60/900F1 Deep Groove Ball Bearing Dimensions & Specifications
60/900F1 deep groove ball bearing: 900 mm bore (d), 1280 mm outside diameter (D), 170 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 900 mm |
|---|---|
| Outside diameter D | 1280 mm |
| Width B | 170 mm |
| Mass | 720 kg |
| Catalogue dynamic load Cr | 1140 kN |
| Catalogue static load Cor | 3100 kN |
| Grease-lubricated speed grease | 340 rpm |
| Oil-lubricated speed oil | 400 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1247 mm |
|---|---|
| Abutment dimension da da | 933 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/900F1?
The 60/900F1 catalogue lists da = 933 mm; Da = 1247 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/900F1?
The listed values for 60/900F1 are grease: 340 rpm; oil: 400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/900F1?
The catalogue reference mass for 60/900F1 is 720 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.