Deep groove ball bearings
60/750F1 Deep Groove Ball Bearing Dimensions & Specifications
60/750F1 deep groove ball bearing: 750 mm bore (d), 1090 mm outside diameter (D), 150 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 750 mm |
|---|---|
| Outside diameter D | 1090 mm |
| Width B | 150 mm |
| Mass | 485 kg |
| Catalogue dynamic load Cr | 995 kN |
| Catalogue static load Cor | 2360 kN |
| Grease-lubricated speed grease | 450 rpm |
| Oil-lubricated speed oil | 530 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1057 mm |
|---|---|
| Abutment dimension da da | 783 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/750F1?
The 60/750F1 catalogue lists da = 783 mm; Da = 1057 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/750F1?
The listed values for 60/750F1 are grease: 450 rpm; oil: 530 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/750F1?
The catalogue reference mass for 60/750F1 is 485 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.