Deep groove ball bearings
619/950F1 Deep Groove Ball Bearing Dimensions & Specifications
619/950F1 deep groove ball bearing: 950 mm bore (d), 1250 mm outside diameter (D), 132 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 950 mm |
|---|---|
| Outside diameter D | 1250 mm |
| Width B | 132 mm |
| Mass | 390 kg |
| Catalogue dynamic load Cr | 1010 kN |
| Catalogue static load Cor | 2800 kN |
| Grease-lubricated speed grease | 340 rpm |
| Oil-lubricated speed oil | 400 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1217 mm |
|---|---|
| Abutment dimension da da | 983 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/950F1?
The 619/950F1 catalogue lists da = 983 mm; Da = 1217 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/950F1?
The listed values for 619/950F1 are grease: 340 rpm; oil: 400 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/950F1?
The catalogue reference mass for 619/950F1 is 390 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.