Deep groove ball bearings
619/900F1 Deep Groove Ball Bearing Dimensions & Specifications
619/900F1 deep groove ball bearing: 900 mm bore (d), 1180 mm outside diameter (D), 122 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 900 mm |
|---|---|
| Outside diameter D | 1180 mm |
| Width B | 122 mm |
| Mass | 350 kg |
| Catalogue dynamic load Cr | 852 kN |
| Catalogue static load Cor | 2280 kN |
| Grease-lubricated speed grease | 380 rpm |
| Oil-lubricated speed oil | 430 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 1154 mm |
|---|---|
| Abutment dimension da da | 926 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 619/900F1?
The 619/900F1 catalogue lists da = 926 mm; Da = 1154 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 619/900F1?
The listed values for 619/900F1 are grease: 380 rpm; oil: 430 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 619/900F1?
The catalogue reference mass for 619/900F1 is 350 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.