732 SERIES · SINGLE-ROW ANGULAR CONTACT BALL BEARING
7324ACM Single-Row Angular Contact Ball Bearing Dimensions & Specifications
7324ACM single-row angular contact ball bearing: 120 mm bore (d), 260 mm outside diameter (D), 55 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 120 mm |
|---|---|
| Outside diameter D | 260 mm |
| Width B | 55 mm |
| Mass | 14.1 kg |
| Catalogue dynamic load Cr | 204 kN |
| Catalogue static load Cor | 269 kN |
| Grease-lubricated speed | 1900 rpm |
| Oil-lubricated speed | 2800 rpm |
Mounting dimensions & additional parameters (10)
| Abutment dimension Da | 246 mm |
|---|---|
| Abutment dimension da | 134 mm |
| Minimum chamfer r12 | 3 mm |
| Minimum chamfer r34 | 1.1 mm |
| Factor X | 0.42 |
| Factor Y | 0.87 |
| Factor Y0 | 0.38 |
| Factor e | 0.68 |
| Maximum fillet ra | 2.5 mm |
| Load centre dimension a | 71.8 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 7324ACM?
The 7324ACM catalogue lists da min = 134 mm; Da max = 246 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 7324ACM?
The listed values for 7324ACM are grease: 1900 rpm; oil: 2800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 7324ACM?
The catalogue reference mass for 7324ACM is 14.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
How does 7324ACM angular contact ball bearing handle combined loads?
7324ACM (120 × 260 × 55 mm) carries combined radial and axial loads along its contact angle. Single-row angular contact bearings carry unidirectional axial load and are normally mounted in opposed pairs (DB/DF) or tandem (DT). Verify contact angle and matched preload or clearance against engineering drawings.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
DIRECT FACTORY SOURCING
Request a Quote for 7324ACM
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

