732 SERIES · SINGLE-ROW ANGULAR CONTACT BALL BEARING

7324BM Single-Row Angular Contact Ball Bearing Dimensions & Specifications

7324BM single-row angular contact ball bearing: 120 mm bore (d), 260 mm outside diameter (D), 55 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 120 mmD 260 mmB 55 mmCr 193 kNMass 14.6 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Single-Row Angular Contact Ball Bearingd 120D 260B 55

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d120 mm
Outside diameter D260 mm
Width B55 mm
Mass14.6 kg
Catalogue dynamic load Cr193 kN
Catalogue static load Cor262 kN
Grease-lubricated speed1900 rpm
Oil-lubricated speed2800 rpm
Mounting dimensions & additional parameters (10)
Abutment dimension Da246 mm
Abutment dimension da134 mm
Minimum chamfer r123 mm
Minimum chamfer r341.1 mm
Factor X0.35
Factor Y0.57
Factor Y00.26
Factor e1.14
Maximum fillet ra2.5 mm
Load centre dimension a107.2 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 7324BM?

The 7324BM catalogue lists da min = 134 mm; Da max = 246 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 7324BM?

The listed values for 7324BM are grease: 1900 rpm; oil: 2800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 7324BM?

The catalogue reference mass for 7324BM is 14.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

How does 7324BM angular contact ball bearing handle combined loads?

7324BM (120 × 260 × 55 mm) carries combined radial and axial loads along its contact angle. Single-row angular contact bearings carry unidirectional axial load and are normally mounted in opposed pairs (DB/DF) or tandem (DT). Verify contact angle and matched preload or clearance against engineering drawings.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 7324BM

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top