LM27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

LM278849D/LM278810/LM278810D Four-Row Tapered Roller Bearing Dimensions & Specifications

LM278849D/LM278810/LM278810D four-row tapered roller bearing: 585.788 mm bore (d), 771.525 mm outside diameter (D), 479.425 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 585.788 mmD 771.525 mmT 479.425 mmMass 587 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 585.788D 771.525T 479.425

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d585.788 mm
Outside diameter D771.525 mm
Overall width T479.425 mm
Mass587 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of LM278849D/LM278810/LM278810D?

The catalogue reference mass for LM278849D/LM278810/LM278810D is 587 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of LM278849D/LM278810/LM278810D?

In the ZQM General Catalogue, LM278849D/LM278810/LM278810D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on LM278849D/LM278810/LM278810D four-row tapered roller bearing?

LM278849D/LM278810/LM278810D (585.788 × 771.525 × 479.425 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for LM278849D/LM278810/LM278810D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top