LM37 SERIES · FOUR-ROW TAPERED ROLLER BEARING

LM377449D/LM377410/LM377410D Four-Row Tapered Roller Bearing Dimensions & Specifications

LM377449D/LM377410/LM377410D four-row tapered roller bearing: 558.8 mm bore (d), 736.6 mm outside diameter (D), 409.575 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 558.8 mmD 736.6 mmT 409.575 mmMass 472 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 558.8D 736.6T 409.575

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d558.8 mm
Outside diameter D736.6 mm
Overall width T409.575 mm
Mass472 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.67
Factor Y01.91
Factor Y11.95
Factor Y22.9
Factor e0.35

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of LM377449D/LM377410/LM377410D?

The catalogue reference mass for LM377449D/LM377410/LM377410D is 472 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of LM377449D/LM377410/LM377410D?

In the ZQM General Catalogue, LM377449D/LM377410/LM377410D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on LM377449D/LM377410/LM377410D four-row tapered roller bearing?

LM377449D/LM377410/LM377410D (558.8 × 736.6 × 409.575 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for LM377449D/LM377410/LM377410D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top