32926 Tapered Roller Bearing 130 × 180 × 32 mm

Extra-light ISO 355 32926 thin-section tapered roller bearing (130 × 180 × 32 mm, 2.40 kg) with a compact 25 mm radial section, 198 kN dynamic and 365 kN static ratings for CNC boring-mill rotary indexing tables and hollow spindles.

Request a Quote

Packing a stiff 130 mm hollow central quill—complete with hydraulic fixture rotary unions, optical encoder cables, and drawbar actuation—inside a CNC horizontal boring mill rotary indexing table leaves precious little radial room for heavy castings. Engineered to the ISO 355 extra-light 329 series, the ZQM 32926 tapered roller bearing condenses 198 kN dynamic capacity (Cr) and 365 kN static rigidity (C0r) into a slender 130 × 180 × 32 mm footprint (25 mm radial wall height, cone width B = 32 mm, cup width C = 25 mm) weighing just 2.40 kg.

32926 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 32926
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)130 mm
Boundary Dimensions & WeightOutside diameter (D)180 mm
Boundary Dimensions & WeightInner-ring width (B)32 mm
Boundary Dimensions & WeightOverall width (T)32 mm
Boundary Dimensions & WeightOuter-ring width (C)25 mm
Boundary Dimensions & WeightReference mass (Weight)2.4 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)198 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)365 kN
Abutment & Fillet DimensionsShaft abutment diameter (da)139 mm
Abutment & Fillet DimensionsShaft abutment reference diameter (db)141 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)167 mm
Abutment & Fillet DimensionsHousing abutment reference diameter (Db)173 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)2 mm
Abutment & Fillet DimensionsMinimum flange chamfer (r34)1.5 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)1.5 mm
Abutment & Fillet DimensionsMaximum flange fillet radius (rb)1.5 mm
Abutment & Fillet DimensionsLoad center distance (a)31 mm
Calculation FactorsCalculation factor (e)0.33
Calculation FactorsAxial load factor (static) (Y0)1
Calculation FactorsAxial load factor (Y)1.8

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Thin-Wall Stiffness & Preload Dynamics of 32926 in Precision Tables

Compared to conventional medium-section 130 mm tapered bearings, the 32926 trades 50 mm of outer-diameter bulk for agile low-inertia indexing while preserving true line-contact cutting rigidity:

  • 25 mm Radial Cross-Section Economy: Housing pockets stay compact around the 180 mm outer diameter so worm-wheel gear rings and hydraulic clamping cylinders fit closer to the table rotation axis, slashing cantilevered overhang.
  • High Axial Rigidity Ratio (e = 0.33, Y = 1.8): A shallower contact angle yields strong radial positioning fidelity during side-milling cuts while maintaining Y = 1.8 axial calculation precision under vertical plunge boring forces.
  • Compact Load Apex Offset (a = 31.0 mm): Placing a matched pair of 32926 bearings with precision-ground inner and outer spacer rings creates a rigid zero-backlash spindle cartridge across minimal axial stack height.
  • 365 kN Clamping & Indexing Stability: Heavy multi-ton workpieces indexed at low rpm demand high static indentation resistance so table positioning repeatability stays micron-true over years of pallet swaps.

ISO 355 Dimensional Equivalence Table for 32926

Maker Model Number Bore d OD D T / B / C Machine-Tool Notes
ZQM 32926 130 mm 180 mm 32 / 32 / 25 mm ISO 355 thin-wall base; P6/P5 precision confirmed per quote
SKF 32926 130 mm 180 mm 32 / 32 / 25 mm Extra-light metric single-row tapered roller
FAG / Schaeffler 32926 130 mm 180 mm 32 / 32 / 25 mm Precision rotary-table & hollow-spindle series
NSK HR32926J 130 mm 180 mm 32 / 32 / 25 mm High-capacity thin-section metric execution
NTN / Koyo 4T-32926 / 32926JR 130 mm 180 mm 32 / 32 / 25 mm Low-profile tapered assembly for indexers

Precision substitution boundary: Nominal ISO 355 boundary alignment (130 × 180 × 32 mm) serves for envelope lookup only and does not guarantee equivalent runout class or torque uniformity. Rotary-table rebuilds must verify precision tolerance grade (such as P5 or P4) and matched-spacer preload calibration with the OEM drawing before swapping brands.

Precision Grinding Tolerances & Spacer-Ring Preload Procedure

  1. Decouple ISO 286-1 Dimensional Fits from ISO 1101 Geometry: Thin-section rings with a 25 mm radial wall telegraph every micron of mating seat imperfection directly onto the rollers. Grind the 130 mm cylindrical hollow-spindle journal and 180 mm table bore to ISO 286-1 IT5 dimensional limits, and separately certify ISO 1101 circularity, cylindricity, and shoulder axial runout to protect finish-machined workpiece roundness.
  2. Hold Exact Thin-Wall Abutments & Corner Fillets: Machine shaft shoulders to da = 139 mm and table housing shoulders to Da = 167 mm, keeping corner fillets safely inside the rmin = 2.0 mm minimum chamfer so the 32 mm cone and 25 mm cup sit dead square.
  3. Dial In Axial Preload via Ground Spacer Rings—Zero Feeler Gauges: Never check a thin-section tapered roller bearing with a radial feeler gauge. Assemble opposing 32926 units with lapped center spacer rings (or calibrated precision locknuts), spin the rotary table to settle roller skew, and tune final axial preload exclusively by measuring breakaway/running friction torque and axial elastic deflection under a test load.
  4. Guard Against Thermal Expansion Preload Spikes: In continuous turning-milling rotary tables, inner spindle heating faster than the cooled cast bed increases preload; validate thermal growth compensation during factory warm-up tests.

Low-Drag Lubrication & Coolant-Exclusion Strategy

Rotary indexing tables alternate between near-static heavy clamping and rapid 90°/180° indexing moves, exposing the 32926 to fretting corrosion and water-soluble metalworking coolant ingress. Apply metered low-viscosity synthetic barium-complex or lithium-complex precision spindle grease (25–30% cavity fill) for intermittent indexing, or recirculating ISO VG 32/46 filtered spindle oil for continuous mill-turn C-axis contouring. Pair top table joints with air-purged labyrinth seals to block fine cast-iron swarf and alkaline flood coolant.

Machine-Tool Rebuild Readiness & Quotation Intake

When quoting 32926 replacements for a boring-mill table or hollow-quill spindle rebuild, prepare four engineering parameters: (1) required precision grade (P0, P6, or P5 runout tolerance), (2) target preloaded torque or spacer-ring grinding gap, (3) continuous contouring rpm versus intermittent indexing duty, and (4) seal/lubrication scheme. Share your spindle drawing and batch quantity through our ZQM precision-bearing engineering desk.

Precision Selection & Reference: Decode precision and cage suffixes with the Bearing Suffix Decoder, inspect dimensional records on the 32926 Catalog Page, browse Tapered Roller Bearings, or review rotary-table bearing guides in Precision Machine Tools.

CNC Rotary Table & Hollow Spindle 32926 FAQ

Why does a CNC boring-mill rotary table choose 32926 over a standard 32226 on a 130 mm shaft?

Both share a 130 mm cylindrical bore, yet the 32926 trims outer diameter from 230 mm down to 180 mm and height from 67.75 mm to 32 mm, dropping mass from 11.0 kg to 2.40 kg. That 25 mm radial cross-section frees vital space for rotary hydraulic unions, direct-drive torque motors, and compact table bases.

How is preload calibrated on a paired 32926 hollow spindle without a feeler gauge?

Technicians lap matched inner and outer spacer rings (or adjust a precision locknut) while tracking spindle rolling torque and axial lift with a micron-resolution dial indicator. Radial feeler gauges cannot enter or measure tapered roller contact preload accurately.

Why are ISO 1101 form tolerances emphasized alongside ISO 286-1 IT5 fits for the 32926?

ISO 286-1 IT5 governs only the diameter size window, whereas ISO 1101 controls roundness, cylindricity, and face runout. A thin 25 mm ring conforms immediately to any three-lobed bore error, ruining rotary table indexing accuracy even when average bore diameter is within IT5.

What causes false brinelling on 32926 rollers inside an indexing table?

Heavy milling chatter transmitted into a stationary clamped table vibrates loaded rollers across a fixed microscopic arc, squeezing grease out of line contacts. Specifying anti-wear EP precision grease and performing periodic full-360° lubricating rotations prevents false brinelling grooves.

Scroll to Top